Accessory Parts List; Required Tools And Supplies - GE Cardiolab II Plus Service Manual

Equipment Overview

Accessory Parts List

Required Tools and Supplies

2-4
GE Medical Systems - Information Technologies recommends the
following accessory parts be used with the CardioLab II Plus Amplifier:
Accessory Name
Abbott Transpac IV Disposable Transducer
with 4 ft. extension Cable*
Abbott Transpac Reusable Cable*
3M Disposable Electrode for ECG
Monitoring*
* This accessory is not stocked by GE Medical Systems Information Technologies.
The following is a list of tools needed to service the CardioLab II Plus
amplifier:
Adjustable wrench with a capacity of 1/2 inch
Phillips screwdriver
Physiologic signal simulator with ECG and pressure outputs
2 mm pin-jack to ECG jumper wires
Bourn's potentiometer tool
Adapter cable to interface pressure simulator to amplifier inputs
Torx T10 driver
Cardiolab® II Plus Amplifier Manual
Table 2. Accessory Parts List
Abbott #42582-08
Abbott #42661-04-42
3M Red Dot #2256
Part Number
2002938-002E