Intended Use; Chapter Content; Related Manuals - GE Cardiolab II Plus Service Manual

Intended Use

Chapter Content

Related Manuals

2002938-002E
The CardioLab II Plus Amplifier is intended for use in an
electrophysiological catheter laboratory or catheterization laboratory
where ECG, direct cardiac, intracardiac and pressure signals need to be
recorded from a patient. This device is intended for use under the direct
supervision of a licensed health care practitioner.
This manual is organized into the following chapters:
1. Introduction: Describes the manual contents and provides
general information about safety precautions, service requirements,
equipment symbols and serial number identification.
2. Equipment Overview: Gives a description of the equipment and
components.
3. Operation: Describes how to connect and disconnect cables to the
amplifier and provides a list of related user's manuals and update
guides. Describes the stimulator bypass connections for emergency
pacing.
Appendix A: Maintenance and Troubleshooting: Describes how
to maintain the equipment and keep it in good working order with a
recommended maintenance schedule, cleaning guidelines, checkout
procedure, and safety tests.
Appendix B: Technical Information: Provides a complete table of
technical specifications for the CardioLab II Plus Amplifier.
Below are a list of the related manuals.
Part Number
2027332-100
2027332-101
2027332-102
2027332-103
Cardiolab® II Plus Amplifier Manual
Document
Mac-Lab Operator's Manual
Cardiolab Operator's Manual
Centricity Cardiology INW Operator's Manual
Mac-Lab/Cardiolab System Security Guide
Introduction
1-3