Double−Speed Random Camera Anm831 - Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual

General Specifications
7.4 Double−Speed Random Camera ANM831
7.4 Double−Speed Random Camera ANM831
Item
Imaging element
Effective pixels
Scanning method
Shutter speed
Gain switch and adjustment
Lens mount
Rated voltage / Allowable voltage
range
Rated current consumption
Operating ambient temperature
Storage ambient temperature
Operating ambient humidity
Storage ambient humidity
Vibration resistance
Shock resistance
Weight
7 − 6
Specification
Readout of all pixels (interline transfer protocol)
1/3 inch CCD fixed photo elements
Horizontal 659 pixels × vertical 494 pixels; pixel size = Square Pixel
Non−interlaced mode (1/60s)
2:1 interlaced (1/120s × 2)
Switched mode (using DIP switches on camera back)
OFF (1/120), 1/200, 1/500, 1/1000, 1/2000, 1/4000, 1/8000, and 1/20000s
(Set by the controller)
Gain switch = 0dB or gain up (DIP switch)
Gain up volume is adjusted within the range of 0 to +10dB using the fine
tuning knob on the back of the camera.
C mount
12 V DC (supplied from the controller) /10.8 to 13.2 V DC
130mA
Performance guarantee temperature = 0 to 40
condensation)
°
Operating = – 10 to 50 C (without icing and dew condensation)
°
– 30 to 60 C (avoid ice and condensation)
Performance guarantee ambient humidity = 50 to 70%RH (without icing
and dew condensation at 25
Operating ambient humidity = 30 to 70%RH (without icing and dew
°
condensation at 25 C)
25 to 90%RH or less (without icing and dew condensation at 25
10 to 55 Hz, 1 vibration per minute, vibration width 1.2 mm, 30 minutes
each in X, Y, Z directions.
2
700m/s , three times each in X, Y and Z directions.
around 70g (excluding cables, lens, and camera mounting hardware)
A200/A100 Hardware
°
C (without icing and dew
°
C)
°
C)