Part Names and Functions
1.1
Controller
7.
Power supply
24 power is required. The power supply is connected to the
input terminal block.
8.
External input terminal (16 pin)
Provides a connection for input from an external source.
9.
External output terminal (16 pin)
Provides a connection for output to an external device.
The input/output terminal block is part order number 1840502 from Phoenix
Contact. See page 3 − 3 for details about compatible electric wiring and the
terminal block.
10. DIN rail mounting lever
You can mount the controller onto a DIN rail with one easy (one−two hook) motion.
Using the Controller Correctly
− When you connect multiple cameras to an A200 controller, be sure the cameras are
of the same type.
− When you connect only one camera to an A200 controller, plug it into the Camera
A jack.
− Do not connect any products to the controller other than those specified by us.
1 − 4
A200/A100 Hardware