Controller - Panasonic MICRO-IMAGECHECKER A200 Series Hardware Manual

A200/A100 Hardware
1.1

Controller

10
Weight: Around 300g
Size: 40 × 120 × 50mm
(Excluding protruding parts)
Names and Functions of Controller Parts
1. Operating LEDs
Indicate the controller's operating status.
POWER (green) This green LED is lit when the controller is
ERROR (red)
READY (green)
2. Keypad jack
Provides a connection for the operation keypad.
3. COM port (RS−232C port)
Provides an RS−232C connection for an external device.
4. Tool port
Provides an RS−232C connection for an external device (only VBT Ver. 2).
5. Monitor
Provides a connection for a monitor.
6. Camera jack
One camera jack is provided on an A100.
Two camera jacks are provided on an A200, one for camera A
and one for Camera B.
9
8
7
A200
connected to a live power source.
The red LED is lit when an error has occurred.
This green LED is lit when the start signal can be
input. (when ready for inspection)
Part Names and Functions
1
2
9
3
4
5
8
6
7
A100
1.1

Controller

1
2
3
4
5
6
1 − 3