Boosterpack Plug-In Module Pinout; Opt3001 Pinout - Texas Instruments BoosterPack Educational Plug-in Module Mark II BOOSTXL-EDUMKII User Manual

www.ti.com
2.1 Hardware Features
2.1.1

BoosterPack Plug-in Module Pinout

The Educational BoosterPack plug-in module MKII adheres to the 40-pin LaunchPad development kit and
BoosterPack plug-in module pinout standard (see
between LaunchPad development kits and BoosterPack plug-in modules across the TI ecosystem.
The 40-pin standard is compatible with the 20-pin standard that is used by other LaunchPad development
kits like the MSP-EXP430G2. This allows for 20-pin LaunchPad development kits to be used with 40-pin
BoosterPack plug-in modules with some limited functionality.
The BOOSTXL-EDUMKII supports BoosterPack plug-in module stacking with its male and female
BoosterPack plug-in module headers. See how many BoosterPack plug-in modules you can stack onto
your LaunchPad development kit to add more functionality like wireless and battery power.
More information about compatibility can also be found at http://www.ti.com/launchpad.
2.1.2 TI OPT3001 Light Sensor
The OPT3001 is a digital ambient light sensor (ALS) that measures the intensity of light as visible by the
human eye. Covering the sensor with your finger or shining a flashlight on it will change the output of the
OPT3001. The digital output is reported over an I
reference designator for the OPT3001 is U2.
More information on the OPT3001 light sensor can be found at http://www.ti.com/product/opt3001.
SLAU599A – August 2015 – Revised March 2017
Submit Documentation Feedback
Figure 3. BoosterPack Plug-in Module Pinout
Table 1. OPT3001 Pinout
BoosterPack Plug-in Module
Header Connection
J1.8
(1)
J1.9
(1)
J1.10
(1)
Pin is multiplexed with the I
BOOSTXL-EDUMKII Educational BoosterPack™ Plug-in Module Mark II
Copyright © 2015–2017, Texas Instruments Incorporated
Figure 3). A standard was created to aid compatibility
2
C- and SMBus-compatible, two-wire serial interface. The
Pin Function
OPT3001 interrupt
2
I C SCL
2
I C SDA
2
C communication lines of the TMP006.
Hardware
5