Table of Contents
Advertisement
Quick Links
BOOSTXL-SENSORS Sensors BoosterPack Plug-in
The Sensors BoosterPack™ kit (BOOSTXL-SENSORS) is an easy-to-use plug-in module for adding digital
sensors to your LaunchPad™ development kit design. SimpleLink™ microcontroller (MCU) LaunchPad
development kit developers can use this BoosterPack plug-in module to start developing sensor
applications using the onboard gyroscope, accelerometer, magnetometer, pressure, ambient temperature,
humidity, ambient light, and infrared temperature sensors.
Figure 1. BOOSTXL-SENSORS BoosterPack™ Plug-in Module
1
Getting Started
......................................................................................................................
2
Hardware
3
Software Examples
4
Additional Resources
..................................................................................................................
5
Schematics
1
BOOSTXL-SENSORS BoosterPack™ Plug-in Module
2
BOOSTXL-SENSORS Overview
3
BoosterPack Plug-in Module Pinout
4
Setting up COM Port Configuration for the LaunchPad Development Kit
5
Programming Sensor Software With the GUI
6
Sensor GUI Layout
7
GUI Sensor Tile
8
GUI Integrated EnergyTrace Measurements
9
Board Movement Window
10
Translation Along the X Axis
11
Translation Along the Y Axis
12
Translation Along the Z Axis
13
Rotation Around the X Axis
14
Rotation Around the Y Axis
SLAU666B – June 2016 – Revised May 2018
Submit Documentation Feedback
...............................................................................................................
..........................................................................................................
......................................................................................................
..........................................................................................
.......................................................................................
.........................................................................................................
............................................................................................................
.................................................................................................
..............................................................................................
..............................................................................................
..............................................................................................
...............................................................................................
...............................................................................................
Copyright © 2016–2018, Texas Instruments Incorporated
SLAU666B – June 2016 – Revised May 2018
Contents
List of Figures
.................................................................
..........................................................................
...........................................................................
BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module
User's Guide
Module
..........................................
3
4
8
19
25
1
4
4
10
10
11
12
13
14
14
14
14
15
15
1
Advertisement
Table of Contents
Related Manuals for Texas Instruments BOOSTXL-SENSORS BoosterPack
Summary of Contents for Texas Instruments BOOSTXL-SENSORS BoosterPack
- Page 1 BoosterPack plug-in module to start developing sensor applications using the onboard gyroscope, accelerometer, magnetometer, pressure, ambient temperature, humidity, ambient light, and infrared temperature sensors. Figure 1. BOOSTXL-SENSORS BoosterPack™ Plug-in Module Contents ....................... Getting Started ........................
-
Page 2: Table Of Contents
Source Files and Folders Trademarks BoosterPack, LaunchPad, SimpleLink, Code Composer Studio, MSP432, EnergyTrace, MSP430Ware, MSP430, E2E are trademarks of Texas Instruments. ARM, Keil, µVision are registered trademarks of ARM Ltd. Bluetooth is a registered trademark of Bluetooth SIG. IAR Embedded Workbench is a registered trademark of IAR Systems AB. -
Page 3: Slau666B – June 2016 – Revised May
(IDE) and start looking at the code examples. Section 3 describes the example projects available to make it easy to understand the provided software. SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 4: Hardware
BoosterPack Pinout Figure 3 shows the pinout of the BoosterPack plug-in module. Figure 3. BoosterPack Plug-in Module Pinout BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 5: Opt3001 Pinout
J2.12 TMP007 Interrupt Pin is multiplexed with the I C communication lines of the OPT3001, BMI160, and BME280. SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 6: Bmi160 Pinout
More information on the BMM150 geomagnetic sensor can be found at www.bosch- sensortec.com/en/bst/products/all_products/bmm150. Table 4. BMM150 Pinout BoosterPack Header Connection Pin Function J1.8 BMM150 Interrupt BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 7: Bme280 Pinout
Table 6. Hardware Change Log PCB Revision Description Rev 1.0 Initial release Rev 1.1 Updates for CE SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 8: Software Examples
For more details on how to get started quickly, and where to download the latest CCS, IAR, and Keil IDEs, Section BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 9: Source File And Folders
"XDS110 Class Application/User UART" under "Ports (COM & LPT)". It will be listed as COMnn, where nn is the number of the port. SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 10: Setting Up Com Port Configuration For The Launchpad Development Kit
5. You should now be seeing live sensor data from the LaunchPad development kit plus the BoosterPack plug-in module. BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 11: Sensor Gui Layout
JSON = JavaScript Object Notation. This is the data format in which the information is sent. For more information, go to www.json.org. SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 12: Gui Sensor Tile
"ON" and "OFF" states can be seen in the table described in Section 3.1.2.4, or in the EnergyTrace software hint. BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 13: Gui Integrated Energytrace Measurements
EnergyTrace software can be used on any application through Code Composer Studio IDE v6 or IAR Embedded Workbench. For more information, visit www.ti.com/tool/energytrace. SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 14: Board Movement Window
Figure 10. Translation Along the X Axis Figure 11. Translation Along the Y Axis Figure 12. Translation Along the Z Axis BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 15: Rotation Around The X Axis
Software Examples www.ti.com Figure 13. Rotation Around the X Axis Figure 14. Rotation Around the Y Axis SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 16: Rotation Around The Z Axis
Software Examples www.ti.com Figure 15. Rotation Around the Z Axis Figure 16. No Movement BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 17: Light Sensing In The Gesture Recognition Window
Driver for communicating with the ambient light sensor tmp007.c Driver for communicating with the infrared temperature sensor SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 18: Source Files And Folders
SENSORS_SensorGUI_MSP432P401R example project. To download the program, you must use a separate IDE, such as CCS or IAR, and the BOOSTXL-SENSORS_SensorGUI_MSP430FR5994 source code found in MSP-EXP430FR5994 Software Examples. BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 19: Additional Resources
SimpleLink SDK without having to download files to the local drive (see Figure 18). Learn more about TI Resource Explorer Cloud at https://dev.ti.com/. Figure 18. TI Resource Explorer Cloud SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 20: Ccs Cloud
A full comparison between CCS IDE Cloud and CCS Desktop is available here. Learn more about Code Composer Studio Cloud IDE at https://dev.ti.com/. Figure 19. CCS Cloud BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 21: Directing The Project>Import Function To The Demo Project
Selecting the \CCS subdirectory also works. The CCS-specific files are located there. When you click OK, CCS should recognize the project and allow import. SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 22: When Ccs Has Found The Project
MSP430Ware software, which contains MSP430 MCU libraries and the TI Resource Explorer. These are already included in a Code Composer Studio IDE installation (unless the user selected otherwise). BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... -
Page 23: Ti Drivers Software Examples In Ti Resource Explorer
Inside TI Resource Explorer, these examples and many more can be found and easily imported into Code Composer Studio IDE with one click. SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... - Page 24 Many online communities focus on the LaunchPad development kit and BoosterPack plug-in module ecosystem; for example, www.43oh.com. You can find additional tools, resources, and support from these communities. BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated...
-
Page 25: Schematics
BME280 I2C Address: 0x77 (7 bit address) GPIO1 INT2 GPIO2 TMP_INT Texas Instruments Mike Pridgen Copyright © 2017, Texas Instruments Incorporated Figure 23. Schematics SLAU666B – June 2016 – Revised May 2018 BOOSTXL-SENSORS Sensors BoosterPack Plug-in Module Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated... - Page 26 Added note that the TMP007 infrared temperature sensor is end-of-life and not populated in Section 2.1.3, TI TMP007 ........................Temperature Sensor Revision History SLAU666B – June 2016 – Revised May 2018 Submit Documentation Feedback Copyright © 2016–2018, Texas Instruments Incorporated...
- Page 27 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
- Page 28 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 29 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧ください。http:/ /www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 3.4 European Union 3.4.1 For EVMs subject to EU Directive 2014/30/EU (Electromagnetic Compatibility Directive): This is a class A product intended for use in environments other than domestic environments that are connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.
- Page 30 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2018, Texas Instruments Incorporated...
- Page 31 IMPORTANT NOTICE FOR TI DESIGN INFORMATION AND RESOURCES Texas Instruments Incorporated (‘TI”) technical, application or other design advice, services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, “TI Resources”) are intended to assist designers who are developing applications that incorporate TI products;...
- Page 32 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments BOOSTXL-SENSORS...
Need help?
Do you have a question about the BOOSTXL-SENSORS BoosterPack and is the answer not in the manual?
Questions and answers