Standard Rack Mounting - ATEN CL3884NW User Manual

Standard Rack Mounting

A standard rack mounting kit is provided with your CL3884NW and can be
mounted in 1U of rack space. The kit enables the switch to be mounted in rack
with a depth of 58.0
following sections. Below is an image of the parts included with your package
that will be needed for rack installation.
Note: 1. It takes two people to mount the switch: one to hold it in place, the
other to screw it in.
2. The standard rack mounting kit does not include screws or cage nuts.
If you need additional screws or cage nuts, contact your rack dealer.
3. Allow at least 5.1 cm on each side for proper ventilation, and at least
12.7 cm at the back for the power cord and cable clearance.
4. Optional mounting kits – including single person Easy Installation
kits – are available with a separate purchase. See Optional Rack
Mounting, page 123 for details.
80.0 cm. The installation procedures are described in the
–
Chapter 2. Hardware Setup
L Bracket L Bracket
R Bracket R Bracket
11