Lcd Osd Configuration; The Lcd Buttons - ATEN CL3884NW User Manual

LCD OSD Configuration

The LCD Buttons

The LCD OSD allows you to set up and configure the LCD display. Four
buttons are used to perform the configuration, as described in the table, below:
Button
MENU
EXIT / LIGHT
LCD On / Off
Button

When you have not entered the LCD OSD Menu function,
pressing this button invokes the Menu function, and brings up
the Main Menu.

When you have entered the LCD OSD Menu function, and
have reached a setting choice with the navigation buttons,
pressing this button brings up its adjustment screen.
When navigating through the menus, this button moves you Right
or Up. When making an adjustment, it increases the value.
When navigating through the menus, this button moves you Left
or Down. When making an adjustment, it decreases the value.

When you have not entered the LCD OSD Menu function,
pressing this button performs an auto adjustment. An auto
adjustment automatically configures all the settings for the LCD
panel to what the OSD considers their optimum values to be.

When you have entered the LCD OSD Menu function, pressing
this button exits the current menu and returns you to the
previous menu. Use it to leave an adjustment menu when you
are satisfied with the adjustment you made.

When you are at the Main Menu, pressing this button exits the
LCD OSD.
Push this button to turn the LCD monitor on and off. The button
lights when the LC monitor is off.
Note:The light only indicates that the monitor is off, not the
attached KVM switch.
Chapter 3. Basic Operation
Function
25