The OSD Menu
The OSD Menu contains all the display settings and system settings for the
CL3884NW. To access the OSD Menu, use any of the following methods:
Tap [Scroll Lock] twice on the console keyboard
Move the console mouse to the top center of the OSD to display the Quick
Access Toolbar, and then click
Note: The hotkey to activate the OSD can be changed to the Ctrl key. See
see Menu Hotkey, page 52.
Password Protection
By default, the CL3884NW's OSD Menu is protected by password and is
locked if the OSD Menu has not been operated for 30 seconds. This is to secure
the advanced settings, the OSD Menu, from general operations using the Quick
Access Toolbar, including:
Change the display mode
Switch sources
Resize and relocate the windows in any multiview mode
Change the display order of the PoP mode
Save configurations
Apply preset configurations
Swap ports
Re-assign channel position in any multiview mode
Note: 1. To disable password protection or to change the password, go to
Password > Password Protection in the OSD Menu.
2. To configure how long the CL3884NW logs out from the OSD
Menu, go to General > Logout Timeout in the OSD Menu.
Chapter 4. OSD Operation
.
49