AGI WRX Series Assembly Manual
  1. Manuals
  2. Brands
  3. AGI Manuals
  4. Farm Equipment
  5. WRX Series
  6. Assembly manual

AGI WRX Series Assembly Manual

Portable grain auger
Hide thumbs Also See for WRX Series:
Table of Contents

Advertisement

Quick Links

Download this manual
WRX Series
Portable Grain Auger
Assembly Manual
This manual applies to the following brands and models:
Westfield, AGI, Hutchinson, Mayrath
8-31, 8-36, 8-41, 8-46, 8-51, 8-56, 8-61, 8-71, 8-76
10-31, 10-36, 10-41, 10-51, 10-61, 10-71
Original Instructions
Read this manual before using product. Failure to
follow instructions and safety precautions can
result in serious injury, death, or property
damage. Keep manual for future reference.
Part Number: 31059 R1
Revised: November 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WRX Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for AGI WRX Series

Summary of Contents for AGI WRX Series

  • Page 1 WRX Series Portable Grain Auger Assembly Manual This manual applies to the following brands and models: Westfield, AGI, Hutchinson, Mayrath 8-31, 8-36, 8-41, 8-46, 8-51, 8-56, 8-61, 8-71, 8-76 10-31, 10-36, 10-41, 10-51, 10-61, 10-71 Original Instructions Read this manual before using product. Failure to...
  • Page 2 New in this Manual The following changes have been made in this revision of the manual: Description Section New brands and models added Model Decal Locations updated Section 4.4 – Brand and Model Decal Placement on page 24 8" Model instructions added Section 4.5 –...

  • Page 3: Table Of Contents

    WRX SERIES – PORTABLE GRAIN AUGER CONTENTS 1. Introduction ............................5 2. Safety............................... 6 2.1 Safety Alert Symbol and Signal Words..................6 2.2 General Safety ........................... 6 2.3 Rotating Flighting Safety ......................7 2.4 Rotating Parts Safety......................... 7 2.5 Hand Winch Safety ........................7 2.6 Drives and Lockout Safety......................
  • Page 4 WRX SERIES – PORTABLE GRAIN AUGER 4.19 Install the Motor Drive......................51 4.19.1 Install the Gearbox ....................51 4.19.2 Install the Gearbox Brackets .................. 52 4.19.3 Install the Motor Mount ..................53 4.19.4 Install the Battery and Fuel Tank (Gas Motor Only)..........57 4.19.5 Install the Motor ....................

  • Page 5: Introduction

    WRX SERIES – PORTABLE GRAIN AUGER 1. INTRODUCTION 1 1 . . I I n n t t r r o o d d u u c c t t i i o o n n This manual describes how to assemble a Westfield Portable Grain Auger.

  • Page 6: Safety

    2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER 2 2 . . S S a a f f e e t t y y 2.1. Safety Alert Symbol and Signal Words This safety alert symbol indicates important safety messages in this manual. When you see this symbol, be alert to the possibility of injury or death, carefully read the message that follows, and inform others.

  • Page 7: Rotating Flighting Safety

    WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY 2.3. Rotating Flighting Safety • KEEP AWAY from rotating flighting. • DO NOT remove or modify flighting guards, doors, or covers. Keep in good working order. Have replaced if damaged. • DO NOT operate the auger without all guards, doors, and covers in place.

  • Page 8: Gas Engine Safety

    2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER 2.6.1 Gas Engine Safety Power Source • Keep guards in place and secure. • Properly ventilate surrounding area. • Never fill the fuel tank with the engine running, while smoking, or near an open flame. Always shut down and allow engine to cool before filling with fuel.

  • Page 9: Pto Driveline Safety

    WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY 2.6.3 PTO Driveline Safety Drive • Keep body, hair, and clothing away from rotating PTO driveline. • Make certain the driveline shields telescope and rotate freely on driveline before attaching. • Make certain the driveline is securely attached at both ends.

  • Page 10: Hydraulic Power Safety

    2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER 2.6.4 Hydraulic Power Safety Power Source • Refer to the rules and regulations applicable to the power source operating your hydraulic drive. • Do not connect or disconnect hydraulic lines while system is under pressure.

  • Page 11: Tire Safety

    WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY 2.7. Tire Safety Failure to follow proper procedures when mounting a tire on a wheel or rim can produce an explosion that may result in serious injury or death. • DO NOT attempt to mount a tire unless you have the proper equipment and experience to do the job.

  • Page 12: Personal Protective Equipment

    2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER 2.9. Personal Protective Equipment The following Personal Protective Equipment (PPE) should be worn when assembling the equipment. Safety Glasses • Wear safety glasses at all times to protect eyes from debris. Coveralls •...

  • Page 13: Safety Decals

    WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY 2.11. Safety Decals • Keep safety decals clean and legible at all times. • Replace safety decals that are missing or have become illegible. See decal location figures that follow. • Replaced parts must display the same decal(s) as the original part.
  • Page 14 2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER Figure 1. Safety Decal Locations for Basic Auger 19960 17109 20807 17113 20813 20817 20811 Figure 2. Safety Decal Locations for EMD Option 20804 20803 31059 R1...
  • Page 15 WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY Figure 3. Safety Decal Locations for MD Option 20804 20803 Figure 4. Safety Decal Locations for PTO-SD Option 20819 Figure 5. Safety Decal Locations for Hydraulic Drive Option 20806 31059 R1...
  • Page 16 2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER Table 1. Safety Decals Part Number Description 20813 DANGER ROTATING FLIGHTING HAZARD To prevent death or serious injury: • KEEP AWAY from rotating auger flighting. • DO NOT remove or modify auger flighting guards, doors, or covers.
  • Page 17 WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY Table 1 Safety Decals (continued) Part Number Description 20819 DANGER ROTATING PTO DRIVELINE To prevent serious injury or death: • Keep body, hair, and clothing away from rotating PTO driveline. • Do not operate equipment unless all driveline, tractor, and equipment shields are in place and in good working order.
  • Page 18 2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20803 (placed on WARNING machine behind guard) MISSING GUARD HAZARD To prevent serious injury or death, shut off power and reattach guard before operating machine.
  • Page 19 WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY Table 1 Safety Decals (continued) Part Number Description 20807 WARNING To prevent serious injury or death: • Read and understand the manual before assembling, operating, or maintaining the equipment. • Only trained personnel may assemble, operate, or maintain the equipment.
  • Page 20 2. SAFETY WRX SERIES – PORTABLE GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20811 WARNING UPENDING HAZARD To prevent death or serious injury: • Anchor intake end and/or support discharge end to prevent upending. • Intake end must always have downward weight.
  • Page 21 WRX SERIES – PORTABLE GRAIN AUGER 2. SAFETY Table 1 Safety Decals (continued) Part Number Description 17109 CAUTION For proper raising and lowering of equipment: • After lowering equipment, always tighten brake lock by turning winch handle clockwise at least two clicks.

  • Page 22: Features

    3. FEATURES WRX SERIES – PORTABLE GRAIN AUGER 3 3 . . F F e e a a t t u u r r e e s s This section covers the main features of the auger. Item Description Item Description Discharge &...

  • Page 23: Assembly

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4 4 . . A A s s s s e e m m b b l l y y Before continuing, ensure you have completely read and understood this manual’s Safety section, in addition to the safety information in the section(s) below.

  • Page 24: Brand And Model Decal Placement

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.4. Brand and Model Decal Placement Important Do not cover any existing safety or instruction decals with the model decals. 1. Apply decals to both sides of auger tube. 2. Center decals vertically and apply to auger tube.

  • Page 25: Assemble Tube & Flighting

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.5. Assemble Tube & Flighting 8" Models Bolt, 7/16" x 2–1/4" Bolt, 7/16" x 1" Locknut, 7/16" 10" Models Flight Connector Shaft Locknut, 7/16" Bolt, 7/16" x 3" Bolt, 7/16" x 1"...

  • Page 26: Install The Lower Driveshaft Guard (41', 71', And 76' Only)

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.6. Install the Lower Driveshaft Guard (41', 71', and 76' Only) For augers with the EMD, MD and Hydraulic drive options only. Assembly Notes: • Remove the driveshaft guard hanger bracket to install the lower driveshaft guard.

  • Page 27: Install The Track Stops

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.7. Install the Track Stops Assembly Notes: • Slide Track Shoe onto track before attaching upper track stop. • A lower track stop is only required for 56'/61'/71' augers and augers with the MD drive option.
  • Page 28 4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER Upper Track Stop Locations (46' – 76') UPPER TUBES Lower Track Stop Locations (56' – 71') MIDDLE TUBES 31059 R1...

  • Page 29: Install The Spout

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.8. Install the Spout 8" Models Spout Half Clamp Bolt, 7/16" x 1–1/2" Locknut, 7/16" 10" Models Spout Wide Half Clamp Bolt, 7/16" x 1–1/2" Locknut, 7/16" 31059 R1...

  • Page 30: Add Grease To Head Cover

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.9. Add Grease to Head Cover 1. Remove the head cover from the discharge end. 2. Fill the head cover half full of grease. 3. Lubricate the chain. 4. Re-install the head cover.

  • Page 31: Install The Intake Cage

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.10. Install the Intake Cage 1/4" Assembly Notes: • Ensure the slot on intake cage engages the retention pin on lower tube. • Maintain a 1/4" clearance between the bushing and the end of the flight.

  • Page 32: Install The Hitch

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.11. Install the Hitch Clevis Hitch Clevis Pin Grip Clip 4.12. Install the Lift Cable 1. Attach the cable to the cable attach rod welded to the bottom of the track by wrapping it around the rod 1.5 times and doubling-back about 7"...
  • Page 33 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 7" (18cm) 6" (15cm) Assembly Notes: • Torque the cable clamps to 15 ft·lb • The Lift Cable installation can be completed after the manual winch is installed. Lift Cable Track Shoe...

  • Page 34: Install Truss Towers

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.13. Install Truss Towers For 46'–76' Models Only 46'/51'/56'/61' Models Assembly Notes: • 46' & 51' Models require one truss tower • 56' & 61' Models require two truss towers Truss Cable Anchor Bracket, Bottom Locknut, 7/16"...
  • Page 35 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 71'/76' Models Truss Cable Anchor Bracket, Bottom Truss Bracket Large Truss Bracket Eyebolt, 1/2" Locknut, 1/2" Wide Truss Cable Anchor (with welded rods) Bolt, 7/16" x 1" Hex Nut, 1/2" Locknut, 7/16"...

  • Page 36: Install Truss Cable

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.14. Install Truss Cable For 46' – 76' Models Only 46'-61' 71'/76' 7-3/4" (20cm) 6-3/4" (17cm) (Minimum Turn Back Length) Cable Truss Cable Anchor (with welded rods) Cable Clamp, 1/4" Cable Clamp, 5/16"...
  • Page 37 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY a. Apply the first clamp 6-3/4" from the cable loop with the u-bolt over the dead end. The live end rests in clamp saddle. Tighten nuts firmly but do not fully tighten.

  • Page 38: Assemble The Frame

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.15. Assemble the Frame 31'/36'/41' Models Assembly Notes: • Put axle up on stands for easier assembly. • Check that air pressure in the tires match pressure indicated on the tire sidewall.
  • Page 39 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 46'/51'/56'/61'/71'/76' Models Assembly Notes: • Put axle up on stands for easier assembly. • Check that air pressure in the tires match pressure indicated on the tire sidewall. • Torque the wheel bolts to 80 ft·lb ± 10 ft·lb (108.5 N·m ± 13.5 N·m) using the pattern shown.

  • Page 40: Attach Frame To Tube

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.16. Attach Frame to Tube STRONG SLING OR CHAIN Important Be sure to use proper hoisting equipment and procedures when raising the discharge end of the auger. Lock out the hoist apparatus prior to working around or under the raised tube.
  • Page 41 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY Short Crossmember Locknut, 1/2" Stabilizer Brace Bolt, 7/16" x 1-3/4" Bolt, 1/2" x 1-1/2" Locknut, 7/16" 31059 R1...

  • Page 42: Install The Manual Winch And Connect The Lift Cable

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.17. Install the Manual Winch and Connect the Lift Cable Assembly Notes: • Do not remove or loosen the double locknut on the winch input shaft; it is an important part of the winch brake system.

  • Page 43: Install The Electric Motor Drive

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.18. Install the Electric Motor Drive 4.18.1 Install the Gearbox Assembly Notes: • Check the gearbox oil level; gearbox should be half full. Use only EP90 lube oil and fill to HALF FULL only.

  • Page 44: Install The Emd Mount Assembly

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.18.2 Install the EMD Mount Assembly EMD Mount Assembly Bolt, 7/16" x 1" Bolt, 1/2" x 1" Locknut, 7/16" Lock Washer, 1/2" 31059 R1...

  • Page 45: Install The Backplate Mount

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.18.3 Install the Backplate Mount Back Plate Mount Locknut, 7/16" Bolt, 7/16" x 1" 31059 R1...

  • Page 46: Install The Electric Motor

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.18.4 Install the Electric Motor Electric Motor Flat Washer, 3/8" Bolt, 3/8" x 1-1/4" Locknut, 3/8" 31059 R1...

  • Page 47: Install The Emd Belt Guard Assembly

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.18.5 Install the EMD Belt Guard Assembly EMD Belt Guard Assembly Flat Washer, 5/16" Bolt, 5/16" x 3/4" Flange Nut, 5/16" 31059 R1...

  • Page 48: Install The Pulleys

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.18.6 Install the Pulleys Assembly Notes: • 31'–41' Models: Use double pulleys. • 46'–76' Models: Use triple pulleys. • Use a straight edge to align the pulleys. Square Key Gearbox Pulley (supplied) Engine Pulley (7-3/4"...

  • Page 49: Install The Belt

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.18.7 Install the Belt Assembly Note: • The belt must run straight. Check the alignment of the pulleys and adjust if necessary. Gearbox Pulley Engine Pulley Belt 4.18.8 Tension the Belt TIGHTEN BELT...
  • Page 50 4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER Assembly Note: • Close and lock the belt guard into place. EMD Belt Guard Assembly 31059 R1...

  • Page 51: Install The Motor Drive

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.19. Install the Motor Drive 4.19.1 Install the Gearbox Assembly Notes: • Check the gearbox oil level; gearbox should be half full. Use only EP90 lube oil and fill to HALF FULL only.

  • Page 52: Install The Gearbox Brackets

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.19.2 Install the Gearbox Brackets Connect Bracket Top Cover Bracket Bolt, 7/16" x 1-1/4" Locknut, 7/16" 31059 R1...

  • Page 53: Install The Motor Mount

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.19.3 Install the Motor Mount Assembly Notes: • Do not overtighten the motor mount arms to the gearbox pivots. • Ensure that the gearbox back plate is centered on the bolt plates.
  • Page 54 4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER Belt Tensioner Handle Assembly Bolt, 5/16" x 1-3/4" Back Pivot Arm, RH Motor Mount Back Pivot Arm, LH Locknut, 3/8" Bolt, 3/8" x 1" Pivot Rod Locknut, 5/16" 31059 R1...
  • Page 55 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY ELECTRIC MOTOR GAS MOTOR Pivot Arm Mount Bracket Back Pivot Arm Hex Nut, 1/2" Bolt, 7/16" x 1" Motor Mount Locknut, 7/16" Motor Mount Arm 31059 R1...
  • Page 56 4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER Bolt, 3/8" x 1" Bolt, 7/16" x 1" Stopper Plate Stability Arm Adjust Stabilizer Bracket, Short Locknut, 7/16" Motor Mount Bolt, 3/8" x 3-1/2" Stabilizing Arm Mount Short Crossmember Locknut, 3/8" 31059 R1...

  • Page 57: Install The Battery And Fuel Tank (Gas Motor Only)

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.19.4 Install the Battery and Fuel Tank (Gas Motor Only) Fuel Tank Battery Hold Down Strap Fuel Tank Straps Fuel Tank Mount Battery Holder Bolts Bolt, 7/16" x 1-1/4" Whiznut, 3/8" Locknut, 7/16"...

  • Page 58: Install The Motor

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.19.5 Install the Motor Assembly Notes: • Install the exhaust pipe, muffler and muffler shield to the engine. • Perform all the engine wiring. • Run a fuel hose from the brass fitting to the fuel filter and secure with hose clamps.

  • Page 59: Install The Engine Pulley

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.19.6 Install the Engine Pulley Assembly Note: • The face of the motor shaft should be flush with the outside edge of the engine pulley. Engine Pulley, Double (4-1/2" OD Engine Pulley, Double (7-3/4" OD...

  • Page 60: Install The Belt

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.19.8 Install the Belt Assembly Note: • The belt must run straight. Check the alignment of the pulleys and adjust if necessary. Belt Engine Pulley Gearbox Pulley 31059 R1...

  • Page 61: Install The Gearbox Pulley Cover

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.19.9 Install the Gearbox Pulley Cover Assembly Note: • Ensure gearbox cover assembly sits on the outside for all mounts. Carriage Bolt, 3/8" x 1" Bolt, 3/8" x 1-1/2" Gearbox Cover Assembly...

  • Page 62: Install The Pto-Sd

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.20. Install the PTO-SD 4.20.1 Install the Driveshaft and Guards 60" 34-1/2" Driveshaft Length C+G+H Driveshaft Guard 33-3/4" 33-3/4" 57-3/4" Length 60" 34-1/2" Driveshaft Length D+E C+G+H Driveshaft Guard 31-1/2" 31-1/2" 57-3/4"...
  • Page 63 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 31" 60" Driveshaft Length C+G+H Driveshaft Guard 56-3/8" 57-3/4" Length 7-7/8" 53-1/2" 60" Driveshaft Length Driveshaft Guard 57-3/4" 57-3/4" Length 16-3/8" 34" 60" Driveshaft Length C+G+H Driveshaft Guard 55-1/4" 57-3/4" Length 20-7/8"...
  • Page 64 4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 35-15/16" Driveshaft 60" 60" Length C+G+H Driveshaft Guard 57-3/4" 55-1/4" 57-3/4" Length 24-1/4" 60" 60" 60" Driveshaft Length Driveshaft Guard 57-3/4" 57-3/4" 57-3/4" Length 24-1/4" Driveshaft 56-1/8" 60" 60" 60" Length Driveshaft Guard 57-3/4"...
  • Page 65 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY Driveshaft Guard Hanger Bracket Lower Driveshaft Guard Clamp-On Bearing Mount Assembly Flange Bearing Hanger Bracket Flange, 1-1/4" Wood Bearing, 1-1/4" Bolt, 3/8" x 1" Whiznut, 3/8" Assembly Note: • Slide the Driveshaft Guard over both Driveshafts and the Driveshaft Connector.
  • Page 66 4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER Clamp-On Bearing Mount Bolt, 7/16" x 1" Half Clamp Locknut, 7/16" Driveshaft Guard Flange Bearing Hanger Bracket Clamp-On Bearing Mount Flange, 1-1/4" Wood Bearing, 1-1/4" Bolt, 3/8" x 1" Whiznut, 3/8" 31059 R1...

  • Page 67: Install The Clamp-On Gearbox Assembly

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.20.2 Install the Clamp-On Gearbox Assembly Assembly Notes: • Check the gearbox oil level; gearbox should be half full. Use only EP90 lube oil and fill to HALF FULL only. • The ends of the gearbox shaft and the driveshaft should be flush with the inside of the chain coupler sprockets.

  • Page 68: Install The Pto Shield

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.20.3 Install the PTO Shield PTO Shield Assembly Bolt, 3/8" x 3/4" Locknut, 3/8" 4.20.4 Install the PTO Assembly Notes: • Clean paint and dirt from gearbox shaft and inside driveline yokes.

  • Page 69: Install The Saddle Bracket

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.20.5 Install the Saddle Bracket Saddle Bracket Half Clamp Bolt, 7/16" x 1" Locknut, 7/16" Assembly Note: • Secure the PTO in the saddle bracket when not in use. Saddle Bracket Saddle Pin...

  • Page 70: Sprocket Head Gearing (540 Rpm Only)

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.20.6 Sprocket Head Gearing (540 RPM Only) 8" Models Assembly Notes: • This step is only required when using a 540 RPM tractor. • Remove the head cover, upper drive chain and sprockets.
  • Page 71 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 10" Models Assembly Notes: • This step is only required when using a 540 RPM tractor. • Remove the head cover, upper drive chain and sprockets. • Install the top existing sprocket to the bottom shaft.

  • Page 72: Install The Hydraulic Drive

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.21. Install the Hydraulic Drive 4.21.1 Install the Half Clamps Hose Clip Half Clamp Weighted Half Clamp Bolt, 7/16" x 1" Locknut, 7/16" 31059 R1...
  • Page 73 WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY LOWER TUBE UPPER TUBE 50" 44" LOWER TUBE 108" 52" LOWER TUBE 120" 58" 31059 R1...

  • Page 74: Install The Hydraulic Motor Mount Assembly

    4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 4.21.2 Install the Hydraulic Motor Mount Assembly Assembly Notes: • The ends of the hydraulic motor shaft and the driveshaft should be flush with the inside of the chain coupler sprockets. • If the driveshaft is too long or too short, do the following: If the driveshaft is too long or too short, do the following: •...

  • Page 75: Install The Hydraulic Hoses

    WRX SERIES – PORTABLE GRAIN AUGER 4. ASSEMBLY 4.21.3 Install the Hydraulic Hoses Hydraulic Hose, 1/2" x 165" Pioneer Coupler 4.22. Install Manual Holder 31'/36'/41' Models Manual Holder Flat Washer 3/8" Manual Holder Mount Flat Washer, 1/4" Axle Locknut, 1/4"...
  • Page 76 4. ASSEMBLY WRX SERIES – PORTABLE GRAIN AUGER 46'/51'/56'/61'/71'/76' Manual Holder Flat Washer 3/8" Manual Holder Mount Flat Washer, 1/4" Axle Locknut, 1/4" Bolt, 1/4" x 3/4" Square U–Bolt, 3/8" x 3-1/16" x 4" Locknut, 3/8" 31059 R1...

  • Page 77: Specifications

    WRX SERIES – PORTABLE GRAIN AUGER 5. SPECIFICATIONS 5 5 . . S S p p e e c c i i f f i i c c a a t t i i o o n n s s Specification 8–31...
  • Page 78 5. SPECIFICATIONS WRX SERIES – PORTABLE GRAIN AUGER Specification 8–46 8–51 8–56 8–61 8–71 8–76 8" (203 mm) Tube Size CAPACITIES Up to 3000 Bu/Hr Unloading Rate (106 m³/Hr) TRANSPORT DIMENSIONS 46'8" 52'2" 56'10" 62'2" 72'0" 76'10" Length (14.2 m) (15.9 m)
  • Page 79 WRX SERIES – PORTABLE GRAIN AUGER 5. SPECIFICATIONS Specification 10–31 10–36 10–41 10–51 10–61 10–71 10" (254 mm) Tube Size CAPACITIES Up to 4800 Bu/Hr Unloading Rate (169 m³/Hr) TRANSPORT DIMENSIONS 32'7" 36'5" 42'5" 52'2" 62'2" 72'0" Length (9.93 m) (11.10 m)

  • Page 80: Appendix

    6. APPENDIX WRX SERIES – PORTABLE GRAIN AUGER 6 6 . . A A p p p p e e n n d d i i x x 6.1. Bolt Torque Table 2 gives the correct torque values for various hardware. Tighten all bolts to the torque specified, unless otherwise noted.
  • Page 81 WRX SERIES – PORTABLE GRAIN AUGER 6. APPENDIX 31059 R1...
  • Page 82 P.O. Box 39 Rosenort, Manitoba, R0G 1W0 Canada Phone: (866) 467-7207 (Canada & USA) or (204) 746–2396 Fax: (866) 768-4852 Website: www.grainaugers.com Email: sales@grainaugers.com ©Ag Growth International Inc. 2019 Printed in Canada If you have any comments or questions on this manual, or find an error, email us at comments@aggrowth.com. Please include the part number listed on the cover page in your message.

This manual is also suitable for:

8-318-368-418-468-518-56 ... Show all

Table of Contents