Connecting / Disconnecting Belt Clip And Neck Strap - Philips SCD589/54 User Manual

Connecting / disconnecting belt clip and
neck strap
If the parent unit is operated using batteries, you can carry it in
and around your house, allowing you freedom of movement
while still monitoring your baby.
Connecting the belt clip
• Insert the little spindle on the rear of the belt clip into the
recess (B-11) on the rear of the parent unit.
Twist the belt clip to the left until it clicks in position.
Disconnecting the belt clip
• Turn the belt clip to the right (TURN B) and take it off.
Connecting the neck strap
• Insert the little spindle at the end of the neck strap into the
recess (B-11) on the rear of the parent unit.
Turn the spindle to the left until it clicks in position.
Disconnecting the neck strap
• Twist the spindle to the right (TURN B) and remove it.
Other features
EN
15