Advertisement
12. Upon delivery, the screen is preset to limit positions specified in the order. Shall the screen
positions be too low or too high, the end positions can be adjusted using the special key provided
in the installation package.
NOTE! Only qualified persons may perform the end-position adjustments. All adjustments made
shall be the sole responsibility of the user. Non-qualified adjustment of the mechanical settings
may cause damage to the screen and shall void any guarantee claims.
Figure 10
13. After final inspection of the entire installation, mount the side blends (magnet fitment on both
sides of the housing) (Figure 11). In the case of side-tensioned screens, unwind the entire screen
surface. Need being, adjust the tensioning with the control screws on both sides of the lower bar)
using an Allen key.
Figure 11
w
w
w .
k
a
Access to limit position adjustment
u
b
e
r .
e
-8-
u
Advertisement
