Advertisement
KAUBER InCeiling is a premium-class electrical projection screen designed for installation in
suspended ceilings. Its versatile aluminium housing has been designed to facilitate installation. In the
Tensioned version, the screen is additionally equipped with a special system improving flatness of the
projection surface. The InCeiling series was created for suspended ceiling installations in both conference
rooms and home-cinema applications.
INSTALLATION AND APPLICATION GUIDELINES
1. One of the wooden blocks protecting the content of the package is a template for installation
holes – do not dispose of it before completion of the assembly and installation works.
2. The housing and lower beam of the screen are protected against mechanical damage with
polyurethane foam. Do not remove the main housing protection before step 9 and the lower beam
protection before step 11 of this assembly and installation manual.
3. The screen shall be installed away from humidity and direct source of strong sunlight.
4. Use a soft damp cloth to clean the screen. Do not use active cleaning chemicals. Protect the screen
assembly from penetration of water or other liquids inside the housing. Carefully wipe the screen
dry after cleaning, to remove any moisture.
Projection screen
Side panels
Mounting bracket
Wooden template for installation holes
Template for the screen slot
Hole marker
Threaded rods
M8 nut
Ø10 rawlplug
Screen limit position adjustment key
Box spanner No.13
Wall-mounted control switch panel (accessible for screens without built-in wireless
controller)
Protection gloves for installation works
IMPORTANT!!!
Content of the set:
w
w
w .
k
a
u
b
e
r .
e
-2-
Qty.
2 pairs
u
1
2
2
1
1
1
4
12
10
1
1
1
Advertisement
