Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Kauber Manuals
  4. Projection Screen
  5. Red Label
  6. Assembly manual

Kauber Red Label Assembly Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
PROJECTION SCREEN
ASSEMBLY MANUAL
RED LABEL
w
w
w .
k
a
u
b
e
r .
e
u
-1-

Advertisement

loading

Related Manuals for Kauber Red Label

Summary of Contents for Kauber Red Label

  • Page 1 PROJECTION SCREEN ASSEMBLY MANUAL RED LABEL...
  • Page 3 Red Label is the newest series of projection screens from KAUBER, designed for avid cinematography fans. This model is characterised by increased distance between the projection surface and the wall and thus can be installed directly over flat TV screen.

  • Page 4: Screen Assembly

    SCREEN ASSEMBLY 1. Screw assembly handles to the wall 20cm from ends of the case (Fig.1). Case dimensions are described at the end of the manual under „Technical data”. Fig.1 2. Depending on the assembly place, screw the handles to the wall (Fig.2a) or the ceiling (Fig.2b) using assembly screws.
  • Page 5 Ceiling assembly Fig.2b 3. In the case of ceiling assembly, connect handles to angle bars using bolts from the set. Fig.3...
  • Page 6 4. Put the screen on the installed handles as shown in the pictures below. Fig.4 5. The grapple system is shown in the pictures below. Grappling the screen may be described in 3 steps: Fig.5...
  • Page 7 6. Block the installed screen using blocking bolts in the handles. Fig.9 7. Delivered screen has end positions requested by the client. If the surface of the screen hangs too high or too low, its position may be adjusted using key from the set (fig.10). NOTE! End positions corrections may be done only by a qualified person.

  • Page 8: Electrical Connection

    ELECTRICAL CONNECTION The screen should be connected to the power supply only by a person with proper electrical qualifications. Before assembling the screen case, lead the power cord to the assembly place, then connect it to the screen during the assembly as shown on diagram A (Fig.11A) or, in the case of the screen with built-in radio control, as shown on diagram B (Fig.11B).
  • Page 9 Connecting key switch from the set. (Key switch is available in the set with screen without built-in radio control)
  • Page 10 Diagram of connecting key switch to the screen 0,75 r STYK DESCRIPTION COLOUR L PHASE BROWN ZERO N BLUE ..1... GROUNDING YELLOW/GREEN BLACK BROWN mm 2 © 230V 50Hz ..::::! -10-...

  • Page 11: Technical Data

    TECHNICAL DATA Case dimensions (with covers): RED LABEL surface width surface height F=A+64mm J=A+30mm H=115mm RED LABEL + BLACK FRAME active surface width active surface height C=A+100mm D=B+100mm F=A+164mm J=A+130mm H=115mm RED LABEL + BLACK FRAME+ BLACK BELT active surface...
  • Page 12 RED LABEL + TENSIONERS active surface width active surface height C=A+100mm D=B+100mm F=A+316mm J=A+270mm H=115mm RED LABEL + TENSIONERS + BLACK BELT active surface width active surface height C=A+100mm D=B+50mm+black belt height F=A+316mm J=A+270mm H=115mm Technical data: Powering: 230V 50Hz Power: 140W –...
  • Page 13 Thank you for choosing KAUBER Buy other KAUBER products on our website -13-...