Invacare HomeFill HF2POST6 Operator's Manual page 17

SECTION 4—INSPECTION AND COMPRESSOR INTERFACE
11. After the cylinder is full, press the compressor power
switch to the Off (O) position (FIGURE 4.6).
12. Grasp the cylinder assembly (FIGURE 4.6).
13. With the other hand, grasp the outer ring (sleeve) of the
connector fillport and push DOWN (FIGURE 4.6).
14. Lift up on the cylinder assembly to remove from the
connector fillport (FIGURE 4.6).
Cylinder
Assembly
Compressor
FIGURE 4.6 Disconnecting the Cylinder from the Compressor
15. When the cylinder fillport is disconnected from the
connector fillport, release the outer ring (sleeve) of the
connector fillport (FIGURE 4.6).
16. Remove the cylinder from the compressor cradle (FIGURE
4.6).
Part No 1148114
Cylinder
Fillport
Power
Switch
Connector
Fillport
17
PUSH DOWN
Outer Ring
(Sleeve)
HomeFill
™