SECTION 4—INSPECTION AND COMPRESSOR INTERFACE
CONSERVER/REGULATOR
INSTALLED
Gauge
Conserver/
Regulator
Cylinder
FIGURE 4.2 Component Identification
4. Remove the post valve cover (located on the cylinder) and
the connector fillport covers (located on the compressor)
(FIGURE 4.3).
Post Valve Cover
5. On the compressor unit, momentarily push DOWN on the
outer ring (sleeve) of the connector fillport to reset the
connector (FIGURE 4.4).
HomeFill
™
Toggle
Valve
Connector
Fillport Cover
FIGURE 4.3 Fillport Covers
14
CONSERVER/REGULATOR
REMOVED
Part No 1148114