FIBARO FGBHRGBW-041-1 Operating Manual page 8

To install FIBARO Rainbow Controller with LED strip and power
adapter:
1. Connect the LED strip channels to the MOLEX connector using a
wire connector according to the diagram below.
2. Fix the connector to the FIBARO Rainbow Controller.
3. Connect the device to the power supply.
4. Add the device to HomeKit or start using it with the button located
on the top of the device.
5. If you connected the channels in a different order you can change
the order in the device parameter in the Fibaro for HomeKit app.
Also, if you connect the RGB led strip instead of the RGBW led
strip, please remember to change the respective setting in the
app as well.
+ B R G W
9
InstallatIon