Return policy Dead on Arrival instruments ....................18 Firmware/Software warranty ........................18 Over Warranty repair(s) policy ........................18 Disclaimer and Limitation of Remedy ......................18 Instruments ..............................19 Accessories ..............................19 Environmental recycling ..........................20 Stonex S500 GNSS Receiver – User Manual...
Page 3
For countries in the European Union (EU) ....................20 For countries outside European Union (EU) .................... 20 Appendix 2: Safety Recommendations ......................21 Warnings and Cautions ..........................21 Wireless Module Approval .......................... 21 Instrument Approval ........................... 21 Stonex S500 GNSS Receiver – User Manual...
1. Interface Description Figure 1.1: Front view of S500 Figure 1.2: Side view of S500 Figure 1.3: Bottom view of S500 Stonex S500 GNSS Receiver – User Manual...
Page 5
Green on when charging finished • Power button Button to turn on/off the receiver USB type-C port Type C port supports USB 2.0, not OTG SIM card slot For Nano SIM card with push pop mode Stonex S500 GNSS Receiver – User Manual...
The name of Stonex GNSS receiver hotspot is the receiver serial number. After connecting to S500 Wi-Fi, open the browser and type the following IP address: 192.168.10.1. A window pops up and asks for username and password; the default username and password are “admin” and “password”...
Page 7
Figure 2.2: Sky plot page In the Satellites Info page, you can see satellites information. Also inside the Satellite info page, the satellite are scheduled in base of the costellation. Figure 2.3: Satellite information page Stonex S500 GNSS Receiver – User Manual...
Page 8
In the information page, you can view device info such as firmware version. Figure 2.4: General Information Page In the checking page, you can run the self-test program. Figure 2.5: Self Check page Stonex S500 GNSS Receiver – User Manual...
Page 9
S500 choose the firmware file from your PC and select Upload. Wait until the process is completed. Figure 2.6: Firmware upgrade page In the observation page, you can download observation files. Download the raw data stored inside the S500 on your PC and then use them in operation as Post Process Job.
Page 10
In the NMEA page, you can download NMEA files. Figure 2.8: Nmea Files Page In the view log page, you can download, and view device run log. Figure 2.9: Log Page Stonex S500 GNSS Receiver – User Manual...
Page 11
In the working mode page, you can set system mode, datalink and other device settings. Figure 2.10: Working mode page Inside working mode page is possible set the Observation settings to start or Stop the Raw Data Log session. Figure 2.11: Working mode page Stonex S500 GNSS Receiver – User Manual...
Figure 2.12: Set NMEA page 2.3 How to connect the handheld to receiver via Bluetooth Make sure that the app Cube-Connector is installed on your handheld; open it, search your S500 with its serial number and connect S500 via Bluetooth.
The cord and charger may only be dry dusted. 3.5 Transport When transporting the product by rail, air or sea, always use the complete original STONEX packaging, transport container and cardboard box, or its equivalent, to protect against shock and vibration.
Consult the dealer or an experienced radio/TV technician for help. • 4.2 FCC RF warning statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Stonex S500 GNSS Receiver – User Manual...
S500 standard bundle is composed with the receiver, the 4 adaptor plugs to compose the battery charger in base on the country, two USB cable (1 Type C-Type C and 1 Type C-Type A), a cloth bag to use the S500 without a pole and a carton Figure 6.1: Standard bundle configuration...
Release Notice This is the June 2019 release of the STONEX® S500 GNSS new model receiver user guide. The following limited warranties give you specific legal rights. You may have others, which vary from state/jurisdiction to state/jurisdiction.
Shipping policy The Customer or the dealer is required to pay for the charges for shipping of fault parts or instruments to STONEX ® representative office and STONEX ® is providing the shipping for return. Dealers need to follow STONEX ®...
GNSSS receiver: S500 GNSS Series. Accessories Accessories & Specific Parts Warranty For Accessories provided by Stonex with the instruments S500 GNSS the following general warranty time is for reference: Battery charger: 7 months. • Adapters for battery charger, Cables, Pole: 2 years.
For countries outside European Union (EU) The treatment, recycling, collection and disposal of electric and electronic devices may vary in accordance with the laws in force in the Country in question. Stonex S500 GNSS Receiver – User Manual...
(note like emc compatibility) or generate not correct functionalities of the instrument itself. Approval is granted by the manufacturer of the equipment. Some countries have unique technical requirements for operation in particular frequency bands. To comply with those requirements, Stonex srl may modified the equipment to be subjected to grant.
Need help?
Do you have a question about the S500 and is the answer not in the manual?
Questions and answers