JTS US-1000D Manual page 26

(7) Basic operation
1. Frequency adjusting
1-1 Hold SET button for 3 seconds to activate frequency.
1-2 Once you see "MHz" blanking, you are ready to select your desired frequency by
using UP and DOWN buttons.
1-3 Press the SET button again to store your changes.
2. Sensitivity adjusting
The sensitivity control(AF level control) is in the up-left of the transmitter's back. Please
use the adjusting sticker to adjust the proper level.
3. To activate "Lock mode"
Hold on to UP button for 3 seconds to activate "Lock mode", press again to unlock.(Pre-
vent accidental programming or switching off)
UP
DOWN
SET
AUDIO ADJUSTING STICKER
AF LEVEL CONTROL
ATTENUATION PAD
22