JTS US-1000D Manual page 17

(3) LCD panel
AF signal
1
RF signal
2
Display for GROUP mode
3
Display for LOCK mode
4
Display for set FREQ. mode
5
Main display
6
Diversity display (A or B antenna)
7
Battery display for the transmitter
8
Group channel display
9
(4) Setting the rubber pad
Four self-adhesive rubber pads are provided
to ensure the stability.
They are to be placed on the bottom side of
the receiver.
(5) Connecting the antennas
The user-friendly US-1000D antenna comes
with easy mount on socket for effortless con-
nection. Connect two antennas on the back
of the receiver and align them upward.
(6) Connecting the main unit
Plug in the DC connector on the back of the
receiver (DCV INPUT).
(7) Connecting the amplifier/mixer console
Plug in the amplifier/mixer console to the
(AF OUT UNBAL / BAL ) sockets.
(8) Turning the receiver on/off
Turn the receiver on by pressing the
(POWER) button.
13
WIRELESS MICROPHONE SYSTEM
5 3
2
1
9
250
250
DCV INPUT
250
AF OUT UNBAL/BAL
POWER
4 8
7
6
ANT.1 / ANT.2