Table of Contents
Advertisement
PERIODIC MAINTENANCE AND MINOR REPAIR
Cleaning and lubricating the
drive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrica-
tion chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
NOTICE :
The drive chain must be lubricated
after washing the motorcycle and
riding in the rain.
6
1. Remove all dirt and mud from the
drive chain with a brush or cloth.
TIP :
For a thorough cleaning, have a
Yamaha dealer remove the drive chain
and soak it in solvent.
2. Spray Yamaha Chain and Cable
Lube or a high-quality spray-type
drive chain lubricant on both sides
and on the middle of the chain,
making sure that all side plates
and rollers have been sufficiently
oiled.
Checking and lubricating the
cables
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the ca-
bles and cable ends should be lubricat-
ed if necessary. If a cable is damaged
or does not move smoothly, have a
Yamaha dealer check or replace it.
WARNING !
Damage to the outer
sheath may interfere with proper ca-
ble operation and will cause the
inner cable to rust. Replace a dama-
ged cable as soon as possible to
prevent unsafe conditions.
Recommended lubricant:
Engine oil
6-23
Checking and lubricating the
throttle grip and cable
The operation of the throttle grip should
be checked before each ride. In addi-
tion, the cable should be lubricated at
the intervals specified in the periodic
maintenance chart.
Hide quick links:
Advertisement
Table of Contents
