Yamaha T115SE 2019 Owner's Manual page 63

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a headlight bulb
1. Headlight bulb holder
2. Cowling B
If a headlight bulb burns out, replace
as follows.
6
1. Remove cowling B. (See page
6-6.)
2. Remove the headlight bulb holder
by pushing it inward and turning
counterclockwise, and then re-
move the defective bulb.
WARNING
WARNING
Headlight bulbs get very hot. There
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
1. Do not touch the glass part of the bulb.
3. Place a new bulb into position, and
then secure it with the bulb holder.
NOTICE :
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
4. Install the cowling.
5. Have a Yamaha dealer adjust the
headlight beam if necessary.
6-29
Replacing a front turn signal
light bulb or an auxiliary light
bulb
1. Turn signal light bulb socket
2. Auxiliary light bulb socket
3. Cowling B
If a front turn signal light or an auxiliary
light bulb burns out, replace it as fol-
lows.
1. Remove front panel and cowlings B,
(See page 6-6.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the defective bulb by pull-
ing it out.