Drive Chain Slack - Yamaha T115SE 2019 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Drive chain slack

1. Drive chain slack
6
The drive chain slack should be
checked before each ride and adjusted
if necessary.
To check the drive chain slack
1. P lace the motorcycle on the cen-
terstand.
2. Shift the transmission into the neu-
tral position.
3. Spin the rear wheel several times
to locate the tightest portion of the
drive chain.
4. Measure the drive chain slack as
a
shown.
Drive chain slack:
25.0 –35.0 mm (0.9 8–1.38 in)
5. If the drive chain slack is incorrect,
adjust it as follows.
To adjust the drive chain slack
1. Locknut
2. Drive chain slack adjusting nut
3. Axle nut
1. Loosen the brake pedal free play
2. Loos en the axle nut, then loosen
6-21
1 2
(a)
(b)
adjusting nut and the brake torque
rod nut.
the locknut at each end of the
swingarm.
3