Yamaha T115SE 2019 Owner's Manual page 68

6. Adjust the drive chain slack. (See-
page 6-21 .)
7. Tighten the axle nut to the specified
torque.
Tightening torque:
Axle nut:
60 Nm ( 6.0 m ·kgf, 43 ft·lbf)
8. Adjust the brake pedal free play.
(See page 6-1 8.)
WARNING
After adjusting the brake pedal free
play, check the operation of the
brake light.
PERIODIC MAINTENANCE AND MINOR REPAIR
Troubleshooting
Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look like
Yamaha parts, but they are often inferi-
or, have a shorter service life and can
lead to expensive repair bills.
6-34
WARNING WARNING
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the
area, including pilot lights from
water heaters or furnaces.
Gasoline or gasoline vapors can
ignite or explode, causing severe
injury or property damage.
6