Avaya 1000E Application Notes page 58

Create a second Route Entry using the same method, with the following settings.
Name
ID
Once the two Route Entrys have been created they must be further modified. Select the entry
RT_for_CS1K – ID:5 from the Configuration Tree on the left. Right click and select Add
Entry In the pop up window, select the following parameters, leaving the remaining fields at
default values.
Route Criteria Type
In Channel Group
Route Action Type
Outgoing Channel Group
Click OK to save the changes
To configure the second route table RT_for SessMan-ID:6, use the same method and select the
following parameters.
Route Criteria Type
In Channel Group
Route Action Type
Outgoing Channel Group
Click OK to save the changes
The screen shot on the next page shows the main IMG configuration screen in the background
with the pop up window for configuring the above settings for entry RT_for_CS1K – ID:5 only.
BD; Reviewed:
SPOC 02/26/2013
A descriptive name i.e. RT_for_SessMan
Select an available ID i.e. 6
Solution & Interoperability Test Lab Application Notes
©2013 Avaya Inc. All Rights Reserved.
Select Channel Group
Select CS1K-ID:0
Select Channel Group
Select SessionManager _SIP-ID:1
Select Channel Group
Select SessionManager _SIP-ID:1
Select Channel Group
Select CS1K-ID:0
58 of 103
DLG1010MXSM62CS