ABB FSCA-01 Manual page 33

Bit Name
10 ABOVE_
LIMIT
11 EXT_CTRL_
LOC
12 EXT_RUN_
ENABLE
13 to Drive-specific (For information, see the drive documentation.)
14
15
Value
1 Actual frequency or speed equals or exceeds
supervision limit (set by drive parameter). Valid in
both directions of rotation.
0 Actual frequency or speed within supervision limit.
1 External Control Location EXT2 selected.
0 External Control Location EXT1 selected.
1 External Run Enable signal received.
0 No External Run Enable signal received.
1 Communication error detected by fieldbus adapter
module.
0 Fieldbus adapter communication OK.
STATE/Description
Communication profiles
33