DirectOut Technologies ANDIAMO 2.AD Hardware Manual page 16

CHAPTER 3: Installation
page 16 of 44
8. Turn on the power switch and check the status of PSUs on
the front panel:
The fi rst seconds after switch-on the actual fi rmware is indicated by
the lower metering panel - e.g. fi rmware version 1.2.
Use the D.O.TEC® Release Map
with the latest fi rmware or software release.
Link: http://www.directout.eu/upload/dokumente/dotec_release_map.pdf
To update the fi rmware an installed D.O.TEC® USB Serial driver (Win-
dows) and the D.O.TEC® Update Tool are necessary. The software
and the installation instructions are available at www.directout.eu.
Link: http://www.directout.eu/en/support/downloads/andiamo_2_ad.html
Keep any packaging in order to protect the device should it need to
be dispatched for service.
®
D.O.TEC ANDIAMO 2.AD Hardware Guide - Version 1.0
DirectOut Technologies
to match your D.O.TEC® device
© 2013 DirectOut GmbH
®