C
Appendix C Instrument specifications
Lambda SC controller cables
Lambda SC controller cables
32
Parameter
Power cord
Mains Fuse (rear of
cabinet)
Cable
Connector type
Smart Shutter
™
DB-9 male to
DB-9 female
Serial
DB-9 female to
DB-9 male
USB
A to B
10 A, 250 V with safety grounded plug
5 Amp, 250 V, 5 x 20 mm, Time Delay fuse (EIC
60127-2) Examples:
Bussmann GDC-5A, S506-5A (RoHS), or
Littelfuse 218.005 or 218.005.P (RoHS)
Cable type
Minimum of 26 awg stranded wire
with 500 volt. Two ferrites are
attached, one at each end.
Connected to metal face plates of
connectors on both ends. One
ferrite is attached at one end.
Dielectric separation of circuits.
Foil shielding.
GeneTitan
Value
Maximum cable
length
3 meters
(~10 feet)
Scanner Use and Maintenance Guide
™