Thermo Scientific GeneTitan Scanner Use And Maintenance Manual page 22

3
Chapter 3 Maintain the Instrument
Lambda LS xenon arc lamp
22
Replace the xenon lamp
™
A new Cermax Xenon Arc Lamp (Cat. No. 01-0740) is required for this procedure.
IMPORTANT! Ensure that you install the lamp in the correct orientation.
1. Hold the lamp by the blue plastic flanges. Ensure that the lamp bulb faces inward
toward the rear heat sink on the unit, and then vertically lower the lamp to
install.
1
Xenon bulb faces away from the fan and towards the heat sink.
1
Heat sink on the Lambda LS unit.
2
2. Replace the warning cover, then hand tighten the bolts.
2
GeneTitan
™
Scanner Use and Maintenance Guide