Related Manuals for Zebex Z-3191LE
Summary of Contents for Zebex Z-3191LE
- Page 1 Z-3191LE Gun Type Handheld Laser Scanner Service Guide Revision History Changes to the original manual are listed below: Version Date Description of Version June. 04, 2013 Initial release...
-
Page 2: Preface
This scanner is in conformity with CE standards. Please note that an approved, CE-marked power supply unit should be used in order to maintain CE conformance. This manual is in A4 format. Please check your printer setting before printing it out. Z-3191LE Service Guide 2 / 9... -
Page 3: Table Of Contents
ERVICE UIDE Table of Contents Preface..................................2 Important Notice ..................................2 For CE-Countries ...................................2 Introduction ...................................4 Product Overview...................................4 Scanner Parts ..................................5 Take Apart ..................................6 Before You Start ..............................6 Important Instructions ..............................6 Tools to Prepare ..................................6 Z-3191LE Service Guide 3 / 9... -
Page 4: Introduction
Embedded with ZEBEX' most advanced decoding technology, Z-3191LE decodes at 75 scans per second and is able to recognize most of the 1D barcodes on the market including GS1 DataBar. Reliable and proven to maintain performance through cruel conditions, it is designed for users requiring sharp scanning performance and industrious applications. -
Page 5: Scanner Parts
Screw,M3*0.5-6.0mm, round, Philip’s head (dyed black) 521-003000-6R0 Self tapping screw,M2-6.0mm, round, Philip’s head 521-003000-8R0 Self tapping screw,M2-8.0mm, round, Philip’s head 603-031900-581 Rubber trigger button 644-7319X0-000 Mylar Tape 031-005512-520 FFC cable 564-031900-362 Trigger button support Z-3191LE Service Guide 5 / 9... -
Page 6: Take Apart
• Philips screwdriver. Please follow these steps to take apart Z-3190. Remove the screws from the scanner. Separate the top cover and the scanner base then remove the mylar tape and the FFC cable. Z-3191LE Service Guide 6 / 9... -
Page 7: Trigger Button
ERVICE UIDE Remove the laser engine from the scann base. Remove the 4 screws pointed in red arrows. Carefully remove the dust cover, buzzer sleeve, and trigger button assembly. Z-3191LE Service Guide 7 / 9... - Page 8 ERVICE UIDE Remove the screw from the cable base cover. Separate the cable base cover from the scanner base. Carefully remove the screws, mylar tape, and FFC cable from the trigger board. Z-3191LE Service Guide 8 / 9...
-
Page 9: Rubber Trigger Button
ERVICE UIDE Remove the trigger button support and rubber trigger button. Z-3191LE Service Guide 9 / 9...
Need help?
Do you have a question about the Z-3191LE and is the answer not in the manual?
Questions and answers