Tabletop Mount - Furuno MU-231 Operator's Manual

1. MOUNTING, WIRING
1.6

Tabletop Mount

You can fix the monitor unit to a tabletop, using the bracket assembly OP26-15 (option).
Name
Bracket L
Bracket R
Spacer (23)
Hole Plug
Snap Button
Hex. Head Slot Bolt-B Washer
Hexagonal Head Slot Bolt
Hexagonal Head Bolt
Spring Washer
Flat Washer
Binding Head Screw
Spacer Assembly
1. Assemble two brackets (L and R) and spacer (23) with flat washers, spring washers, hexag-
onal head slot bolts (M10x30). Cover each hexagonal head slot bolt with hole plug. Also, cover
each screw hole on the hanger with a snap button (4 pcs.).
Spacer (23)
Bracket L
2. Fix the above assembly to the mounting location with four hex bolts (M10, 4 pcs, local supply).
Hex Bolt (4 places)
(Type A: M12, Type B: M10)
3. Attach the flush mounting panels to the monitor unit from the rear with the binding head
screws (M4x10, 8 pcs., supplied). See step 3 in section 1.2.
4. Connect all cables at the back of the monitor unit. See section 1.8.
Bracket Assembly OP26-15 (Code No.: 001-116-730)
03-163-7712
03-163-7713
03-163-2071
CP-30-HP-13
KB-13 Black
M6x25
M10x30
M4x10
M10
M10
M4x10
OP26-21-1
Bracket R
Type
100-366-311-10
100-366-321-10
100-305-371-10
000-160-074-10
000-570-276-10
000-162-949-10
000-162-884-10
000-162-728-10
000-167-233-10
000-167-232-10
000-172-165-10
001-143-370
Snap Button
Flat Washer
Spring Washer
Hexagonal Head Slot Bolt
Snap Button
8
Code No.
Hole Plug
Qty
1
1
1
2
4
4
2
2
2
2
8
4