Resistance Adjustment - V-fit CYCLE-ATC-16/3 Assembly & User Manual

Note
In accordance with BS EN 957,
the braking (resistance) system
on this cycle is speed
independent.
The flywheel can be stopped by
pushing down on the brake knob
if emergency.
Note
For your safety, always make
sure the flywheel is locked
by full tightening brake knob
while it is without using.
Assembly & Adjustments

RESISTANCE ADJUSTMENT

To increase the intensity of your workout, simply adjust the tension
knob (30). Turning clockwise will increase the resistance created by
the brake Pad.
To stop the flywheel quickly, push down on the Brake Knob (30).
30
Page 15