Fuji Electric SIO Instruction
  1. Manuals
  2. Brands
  3. Fuji Electric Manuals
  4. Inverter
  5. SIO
  6. Instruction
Fuji Electric SIO Instruction

Fuji Electric SIO Instruction

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INVERTER SIO
Driver
1
System Configuration....................................................................................................... 3
2
External Device Selection ................................................................................................ 7
3
Communication Settings .................................................................................................. 8
4
Setup Items .................................................................................................................... 28
5
Cable Diagrams ............................................................................................................. 32
6
Supported Device Addresses......................................................................................... 65
7
Device Code and Address Code.................................................................................... 72
8
Error Messages.............................................................................................................. 76
1
Fuji Electric Systems Co., Ltd.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SIO and is the answer not in the manual?

Questions and answers

Related Manuals for Fuji Electric SIO

Summary of Contents for Fuji Electric SIO

  • Page 1: Table Of Contents

    Fuji Electric Systems Co., Ltd. INVERTER SIO Driver System Configuration....................... 3 External Device Selection ....................7 Communication Settings ....................8 Setup Items ........................28 Cable Diagrams ......................32 Supported Device Addresses..................65 Device Code and Address Code..................72 Error Messages......................76...
  • Page 2 In this manual, the connection procedure is described in the sections identified below: System Configuration "1 System Configuration" (page 3) This section lists the types of External Devices and SIO that you can connect. External Device Selection "2 External Device Selection" (page 7) Select the model (series) of the External Device and its connection method.

  • Page 3: System Configuration

    INVERTER SIO Driver System Configuration The following section shows system configurations for connecting Fuji Electric Systems Co., Ltd. External Devices and the Display. Setting Cable Series Inverter Link I/F SIO Type Example Diagram Setting Cable Terminal block on RS-422/485 FRENIC5000G11S...
  • Page 4 INVERTER SIO Driver • If a communication error is generated while operating via RS-422/485, there is a possibility that the stop command will not be recognized via RS-422/485. This is dangerous, so be sure to perform an emergency stop using the External Device outer signal terminal’s force stop function.
  • Page 5 PL-3700K, PL-3900T The RI/5V can be switched. Use the IPC’s switch to change if necessary. Set up the SIO type with the DIP Switch. Please set up as follows according to SIO type to be used. DIP Switch setting: RS-232C...
  • Page 6 INVERTER SIO Driver DIP Switch setting: RS-422/485 (4 wire) DIP Switch Setting Description Reserved (always OFF) SIO type: RS-422/485 Output mode of SD (TXD) data: Always output Terminal resistance (220Ω) insertion to SD (TXD): None Terminal resistance (220Ω) insertion to RD (RXD): None...

  • Page 7: External Device Selection

    Use an integer from 1 to 4 to enter the number of Devices/PLCs to connect to the Number of Devices/PLCs display. Select the manufacturer of the External Device to be connected. Select "Fuji Electric Manufacturer Systems Co., Ltd.". Select the model (series) of the External Device to be connected and connection method.

  • Page 8: Communication Settings

    INVERTER SIO Driver Communication Settings This section provides examples of communication settings recommended by Pro-face for the Display and the External Device. Setting Example 1 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC].
  • Page 9 INVERTER SIO Driver External Device Settings To configure communication settings, use the PRG, FUNC/DATA, Up, Down, or SHIFT key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 10 INVERTER SIO Driver Setting Example 2 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 10(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 11 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 12 INVERTER SIO Driver Setting Example 3 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 10(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 13 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 14 INVERTER SIO Driver Setting Example 4 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 5(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 15 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 16 INVERTER SIO Driver Setting Example 5 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 5(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 17 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 18 INVERTER SIO Driver Setting Example 6 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 5(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 19 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 20 INVERTER SIO Driver Setting Example 7 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 5(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 21 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 22 INVERTER SIO Driver Setting Example 8 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 5(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 23 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 24 INVERTER SIO Driver Setting Example 9 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 5(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 25 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.
  • Page 26 INVERTER SIO Driver 3.10 Setting Example 10 GP-Pro EX Settings Communication Settings To display the setup screen, from the [System Settings] workspace, select [Device/PLC]. • Set Wait To Send to 5(ms) or more. Device Setting To display the [Individual Device Settings] dialog box, select the External Device and from [Device-Specific Settings] in the [Device/PLC] window, click [Settings].
  • Page 27 INVERTER SIO Driver External Device Settings To configure communication settings, use the FUNC/DATA, Up, Down, or PRG/RESET key on the touch panel located on the front of the External Device. Refer to your External Device manual for details. Turn ON the power of the External Device.

  • Page 28: Setup Items

    In the communication settings, set [SIO Type] correctly according to the serial SIO Type interface specifications of the Display. If you select an SIO type that the serial interface does not support, proper operation cannot be guaranteed. Refer to your Display manual for details on the serial interface specifications.

  • Page 29: Device Settings

    INVERTER SIO Driver Setup Items Setup Description Enter the time (seconds) for which the Display waits for the response from the External Device, from "1 to 127". Timeout • If the Timeout value is set to less than 10(s), it will be changed to 10(s) when initializing the External Device from the Display.
  • Page 30 In the communication settings, set [SIO Type] correctly according to the serial SIO Type interface specifications of the Display. If you select an SIO type that the serial interface does not support, proper operation cannot be guaranteed. Refer to your Display manual for details on the serial interface specifications.
  • Page 31 INVERTER SIO Driver Setup Items Setup Description Enter the time (seconds) for which the Display waits for the response from the External Device, from "1 to 127". Timeout • If the Timeout value is set to less than 10(s), it will be changed to 10(s) when initializing the External Device from the Display.

  • Page 32: Cable Diagrams

    INVERTER SIO Driver Cable Diagrams The following cable diagrams may be different from cable diagrams recommended by Fuji Electric Systems Co., Ltd. Please be assured there is no operational problem in applying the cable diagrams shown in this manual. •...
  • Page 33 INVERTER SIO Driver • The recommended connection cable is the Furukawa Electric's AWM2789 long-distance cable. • Depending on the operating environment, malfunctions may occur due to External Device noise. In this case, connect the ferrite core or condenser to the cable.
  • Page 34 INVERTER SIO Driver A) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side Signal name Shield External Device side Display CA3-ADPCOM-01 Terminal block Signal name...
  • Page 35 INVERTER SIO Driver • 1:n Connection Display side D-Sub 9 pin (socket) Termination resistance Signal name External Device side External Device side Shield 120 Ω (1/2W) Shield Terminal block Terminal block Termination resistance Signal name Signal name Ω (1/2W) DX(+)
  • Page 36 INVERTER SIO Driver D) When using the online adapter (CA4-ADPONL-01) by Pro-face, and a user-created cable • 1:1 Connection Display side D-Sub 9 pin (plug) Signal name Shield TRMRX External Device side CA4-ADPONL-01 Terminal block Display Signal name Termination DX(+) resistance Ω...
  • Page 37 INVERTER SIO Driver • 1:n Connection Display side External Device side External Device side Shield Shield Terminal block Terminal block Display Signal name CA3-ADPCOM-01 Signal name Signal name Termination DX(+) DX(+) resistance Ω DX(-) DX(-) (1/2W) CA3-ADPTRM-01 User-created cable F) When using a user-created cable •...
  • Page 38 • The following cables are recommended as the connecting cable for use with RJ-45 connectors. Part name Model Remarks Extension cable by Fuji Electric CB-5S, CB-3S, 3 cables available in length of 5m, Systems Co., Ltd. CB-1S 3m, and 1m.
  • Page 39 INVERTER SIO Driver • Set the termination resistance switch on the External Device as follows: Series Switch Setting FVR-E11S FRENIC-MEGA FRENIC-Mini OPC-C1-RS card FRENIC-Eco FRENIC-Multi • RJ-45 connector pin numbers differ depending on the External Device series. The following pin numbers correspond to each series. Refer to your External Device manual for details.
  • Page 40 INVERTER SIO Driver A) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side Signal name Display External Device side CA3-ADPCOM-01 RJ-45 connector Signal name...
  • Page 41 INVERTER SIO Driver B) When using a user-created cable • 1:1 Connection Display side D-Sub 9 pin (socket) Termination resistance Signal name Ω External Device side (1/2W) RJ-45 connector Signal name Display DX(+) DX(-) Shell • 1:n Connection Display side...
  • Page 42 INVERTER SIO Driver C) When using the online adapter (CA4-ADPONL-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side Signal name Display Branch Adapter side CA4-ADPONL-01 RJ-45 connector Signal name DX(+) CA3-ADPTRM-01...
  • Page 43 INVERTER SIO Driver D) When using the online adapter (CA4-ADPONL-01) by Pro-face, and a user-created cable • 1:1 Connection Display side D-Sub 9 pin (plug) Signal name TRMRX External Device side CA4-ADPONL-01 RJ-45 connector Display Signal name DX(+) DX(-) TRMTX...
  • Page 44 INVERTER SIO Driver E) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side External Device side RJ-45 connector Signal name Display CA3-ADPCOM-01 Signal name...
  • Page 45 INVERTER SIO Driver F) When using a user-created cable • 1:1 Connection External Device side Display side D-Sub 9 pin (socket) RJ-45 connector Termination resistance Signal name Signal name Ω (1/2W) DATA+ DX(+) DATA- DX(-) Display Shell • 1:n Connection...
  • Page 46 INVERTER SIO Driver Cable Diagram 3 Display Cable Remarks (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 (COM2) LT (COM1) User-created cable User-created cable Online adapter by Pro-face CA4-ADPONL-01...
  • Page 47 INVERTER SIO Driver • Depending on the operating environment, malfunctions may occur due to External Device noise. In this case, connect the ferrite core to the cable. RS-485 communication cable Display External Device Ferrite core Pass the same-phase wires through or turn them around the ferrite core 2 or 3 times.
  • Page 48 INVERTER SIO Driver A) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side Signal name Shield External Device side Display CA3-ADPCOM-01 Terminal block Signal name...
  • Page 49 INVERTER SIO Driver • 1:n Connection Display side D-Sub 9 pin (socket) Termination resistance Signal name External Device side External Device side Shield Ω 112 (1/2W) Terminal block Terminal block Shield Signal name Signal name Display DX(+) DX(+) DX(-) DX(-) Shell •...
  • Page 50 INVERTER SIO Driver D) When using the online adapter (CA4-ADPONL-01) by Pro-face, and a user-created cable • 1:1 Connection Display side D-Sub 9 pin (plug) Signal name Shield TRMRX External Device side CA4-ADPONL-01 Terminal block Display Signal name DX(+) DX(-)
  • Page 51 INVERTER SIO Driver • 1:n Connection Display side External Device side External Device side Shield Terminal block Terminal block Signal name Display CA3-ADPCOM-01 Shield Signal name Signal name DX(+) DX(+) DX(-) DX(-) CA3-ADPTRM-01 User-created cable • For 1:n connection, set the termination resistance switch on the External Device located at the end to ON.
  • Page 52 INVERTER SIO Driver Cable Diagram 4 Display Cable Remarks (Connection Port) COM port conversion adapter by Pro-face CA3-ADPCOM-01 (COM1) Terminal block conversion adapter by Pro-face AGP-3302B (COM2) CA3-ADPTRM-01 (COM2) LT (COM1) User-created cable User created cable Online adapter by Pro-face...
  • Page 53 INVERTER SIO Driver A) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side Signal name Shield External Device side Display CA3-ADPCOM-01 Terminal block Signal name...
  • Page 54 INVERTER SIO Driver • 1:n Connection Display side D-Sub 9 pin (socket) Termination resistance Signal name External Device side External Device side Shield 120 Ω (1/2W) Terminal block Terminal block Termination Shield resistance Signal name Signal name Ω (1/2W) Display...
  • Page 55 INVERTER SIO Driver D) When using the online adapter (CA4-ADPONL-01) by Pro-face, and a user-created cable • 1:1 Connection Display side D-Sub 9 pin (plug) Signal name Shield TRMRX External Device side CA4-ADPONL-01 Terminal block Display Signal name Termination DX(+) resistance Ω...
  • Page 56 INVERTER SIO Driver • 1:n Connection Display side External Device side External Device side Shield Terminal block Terminal block Signal name Display CA3-ADPCOM-01 Shield Signal name Signal name Termination DX(+) DX(+) resistance Ω DX(-) DX(-) (1/2W) CA3-ADPTRM-01 User-created cable F) When using a user-created cable •...
  • Page 57 • The following cables are recommended as the connecting cable for use with RJ-45 connectors. Parts name Model Remarks Extension cable by Fuji Electric CB-5S, CB-3S, 3 cables available in length of 5m, Systems Co., Ltd. CB-1S 3m, and 1m.
  • Page 58 INVERTER SIO Driver • Set the termination resistance switch on the External Device as follows: Series Switch Setting FRENIC-Multi OPC-E1-RS card • The following are RJ-45 connector pin numbers for the FRENIC-Multi series. Pin No. FRENIC-Multi VCC (+5V) DX (-)
  • Page 59 INVERTER SIO Driver A) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side External Device side Signal name RS-485 communication card Display (OPC-E1-RS card)
  • Page 60 INVERTER SIO Driver B) When using a user-created cable • 1:1 Connection Display side D-Sub 9 pin (socket) Termination External Device side resistance Signal name RS-485 communication card Ω (1/2W) (OPC-E1-RS card) RJ-45 connector Signal name DX(+) Display DX(-) Shell •...
  • Page 61 INVERTER SIO Driver C) When using the online adapter (CA4-ADPONL-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection Display side External Device side Signal name RS-485 communication card Display (OPC-E1-RS card) CA4-ADPONL-01 RJ-45 connector...
  • Page 62 INVERTER SIO Driver D) When using the online adapter (CA4-ADPONL-01) by Pro-face, and a user-created cable • 1:1 Connection Display side D-Sub 9 pin (plug) Signal name External Device side RS-485 communication card TRMRX CA4-ADPONL-01 (OPC-E1-RS card) RJ-45 connector Display...
  • Page 63 INVERTER SIO Driver E) When using the COM port conversion adapter (CA3-ADPCOM-01), the terminal block conversion adapter (CA3-ADPTRM-01) by Pro-face, and a user-created cable • 1:1 Connection External Device side RS-485 communication card Display side (OPC-E1-RS card) RJ-45 connector Display...
  • Page 64 INVERTER SIO Driver F) When using a user created cable • 1:1 Connection External Device side RS-485 communication card Display side (OPC-E1-RS card) D-Sub 9 pin (socket) RJ-45 connector Termination resistance Signal name Signal name Ω (1/2W) DATA+ DX(+) DATA-...

  • Page 65: Supported Device Addresses

    INVERTER SIO Driver Supported Device Addresses The following section shows the range of supported device addresses. Please note that the actual supported range of the devices vary depending on the External Device to be used. Please check the actual range in the manual of your External Device.
  • Page 66 INVERTER SIO Driver FVR-E11S Series : This address can be specified as system data area. Device Bit Address Word address 32 bits Remarks Basic function F00.00-F42.15 F00-F42 Terminal function E01.00-E42.15 E01-E42 Control function C01.00-C33.15 C01-C33 Motor 1 P01.00-P10.15 P01-P10 High level function H01.00-H46.15...
  • Page 67 INVERTER SIO Driver FVR-C11S Series : This address can be specified as system data area. Device Bit Address Word address 32 bits Remarks Basic function F00.00-F36.15 F00-F36 Terminal function E01.00-E03.15 E01-E03 Control function C01.00-C07.15 C01-C07 Motor 1 P00.00-P00.15 High level function H01.00-H25.15...
  • Page 68 INVERTER SIO Driver FRENIC-MEGA Series : This address can be specified as system data area. Device Bit Address Word address 32 bits Remarks Fundamental function F00.00-F80.15 F00-F80 Extension terminal function E01.00-E99.15 E01-E99 Control function of frequency C01.00-C53.15 C01-C53 Motor 1 parameter P01.00-P99.15...
  • Page 69 INVERTER SIO Driver FRENIC-Mini Series : This address can be specified as system data area. Device Bit Address Word address 32 bits Remarks Fundamental function F00.00-F51.15 F00-F51 Extension terminal function E01.00-E99.15 E01-E99 Control function of frequency C01.00-C52.15 C01-C52 Motor 1 parameter P02.00-P99.15...
  • Page 70 INVERTER SIO Driver FRENIC-Eco Series : This address can be specified as system data area. Device Bit Address Word address 32 bits Remarks Fundamental function F00.00-F44.15 F00-F44 Extension terminal function E01.00-E99.15 E01-E99 Control function of frequency C01.00-C53.15 C01-C53 Motor 1 parameter P01.00-P99.15...
  • Page 71 INVERTER SIO Driver FRENIC-Multi Series : This address can be specified as system data area. Device Bit Address Word address 32 bits Remarks Fundamental function F00.00-F51.15 F00-F51 Extension terminal function E01.00-E99.15 E01-E99 Control function of frequency C01.00-C53.15 C01-C53 Motor 1 parameter P01.00-P99.15...

  • Page 72: Device Code And Address Code

    INVERTER SIO Driver Device Code and Address Code Use device code and address code if you select "Device Type & Address" for the address type of the data display. FRENIC5000G11S/FRENIC5000P11S Series Device Code Device Device Name Address Code (HEX) Basic function...
  • Page 73 INVERTER SIO Driver FVR-C11S Series Device Code Device Device Name Address Code (HEX) Basic function 0080 Word address Terminal function 0081 Word address Control function 0082 Word address Motor 1 0083 Word address High level function 0084 Word address Option...
  • Page 74 INVERTER SIO Driver FRENIC-Mini Series Device Code Device Device Name Address Code (HEX) Fundamental function 0080 Word address Extension terminal function 0081 Word address Control function of frequency 0082 Word address Motor 1 parameter 0083 Word address High performance function...
  • Page 75 INVERTER SIO Driver FRENIC-Multi Series Device Code Device Device Name Address Code (HEX) Fundamental function 0080 Word address Extension terminal function 0081 Word address Control function of frequency 0082 Word address Motor 1 parameter 0083 Word address High performance function...

  • Page 76: Error Messages

    INVERTER SIO Driver Error Messages Error messages are displayed on the Display screen as follows: "No. : Device Name: Error Message (Error Occurrence Area)". Each description is shown below. Item Description Error number. Name of the External Device where an error has occurred. Device/PLC name is the title of Device Name the External Device set with GP-Pro EX.
  • Page 77 INVERTER SIO Driver Error Code Description Data error • The write data is beyond the writable range. Error during writing • An attempt was made to write another function data during function writing. This error does not occur in FRENIC-Mini Series.
  • Page 78 INVERTER SIO Driver GP-Pro EX Device/PLC Connection Manual...

Table of Contents