Pre-Installation; Intercom Location - Firecom 3010 Series Installation & Operation Manuals

IMPORTANT
6.
P R E - I N S T A L L A T I O N
Before installing the Firecom 3010 Series Intercom System, it is VERY IMPORTANT to
take a little time and plan the installation. This section will provide information to assist in
planning the installation. You should read AND UNDERSTAND all of the information
contained in this section, as well as the sections on the System Orientation (page 1) and
Installation (page 12) BEFORE installing the 3010 Series Intercom onto the apparatus.
Taking a little time to plan the installation BEFORE installing the 3010 Series Intercom
System may prevent many installation errors which could result in improper system
operation.
If you have any questions regarding the information contained in this section, contact your
local Firecom Dealer for clarification BEFORE proceeding with the installation.

INTERCOM LOCATION

When choosing a location to mount the 3010 Series Intercom Unit, the following conditions
should be considered:
• The intercom should be close to the 2-way radio and the appropriate power
connections.
• Allow for at least 3 inches clearance on the sides and rear of the intercom unit for
service and installation.
• The intercom should be placed where it will be easy to route all the CA Cables
from the Headset Modules.
• The intercom should be placed where the controls may be easily accessed.