Before installing the Firecom 3000C Intercom System, it is VERY IMPORTANT to take
a little time and plan the installation. This section will provide information to assist in the
process of planning the particular installation. You should read AND UNDERSTAND
all of the information contained in this section, as well as the sections on the
System Orientation (page 1) and Installation (page 10) BEFORE installing the 3000C onto
the apparatus.
Taking a little time to plan the installation BEFORE installing the 3000C Intercom System,
may prevent many installation errors which could result in improper system operation.
If you have any questions regarding the information contained in this section, contact your
local Firecom Dealer for clarification BEFORE proceeding with the installation.
INTERCOM LOCATION
When choosing a location to mount the 3000C Intercom Unit, the following conditions
should be considered:
•
The intercom should be close to the 2-way radio and the appropriate power
connections.
•
Allow at least 3 inches clearance on the sides and rear of the intercom unit for
service and installation.
•
The intercom unit should be placed where it will be easy to bring all the CA
Cables from the Headset Modules.
P R E - I N S T A L L A T I O N
IMPORTANT
5.
Need help?
Do you have a question about the 3000C and is the answer not in the manual?