Table of Contents
Advertisement
[Equalizer Settings]
Clicking the EQ button (see
Both speaker and AUX outputs allow equalizer settings on 5 points and PEQ (parametric equalizer) parameters
can be set on all of the 5 points. In addition, PEQ or HPF (high-pass filter) settings can be performed on the
leftmost point, and PEQ or LPF (low-pass filter) settings can be performed on the ringhtmost point.
(Example: Speaker Output Equalizer Screen)
1
(1) Back icon
Clicking this icon returns the screen to the Mixer Screen.
(2) EQ curve display section
EQ curves are displayed depending on parameter settings.
(3) PEQ/HPF setting section
Used to set PEQ or HPF parameters.
Name
A PEQ/HPF selection
B Parameter settings
[Setting Ranges and Initial Settings]
Setting Item Setting Contents
PEQ
Freq (Hz)
Gain (dB)
Q
HPF
Freq (Hz)
the previous
page) displays the equalizer screen.
2
A
B
3
4
Select the parameter type (PEQ or HPF).
Initial setting as follows:
Speaker output: HPF
AUX output:
Set parameters for Freq (frequency), Gain and Q.
The setting range and initial settings are shown in the table below.
Note: Gain and Q cannot be set if HPF is selected in the PEQ/HPF selection.
Setting Range
20 to 20000
–15 to 15, 0.5 dB steps 0
0.267 to 69.249
20 to 20000
C
D
6
Description
PEQ
Initial Setting
Speaker Output
300
0.718
300
7
F
E
G
5
AUX Output
200
0
4.318
200
7
Advertisement
Table of Contents
