Table of Contents
Advertisement
Name
A Input gain display
B Input level indicators
C Faders
D Mute button
E Reset button
(2) Output signal adjustment section (OUTPUT)
Perform settings related to output signals.
Settings for the following five types of output can be performed:
Speaker
USB
Bluetooth
CODEC
AUX
Name
F EQ button
G Output gain display
H Output level indicators Display output levels.
I Faders
J Mute button
K Reset button
(3) APPLY button
Click this button after all settings on this screen are completed. Setting contents are applied.
Input gains are displayed numerically.
Numerical values can be changed with the arrows to the right of each value.
Initial setting: 0 dB
Tip: Linked to faders (C).
Display input levels.
Used to change input gains.
Tip: Linked to input gain display (A).
Click to mute corresponding input. Clicking again returns input to the previous
level.
Click to return all input adjustment settings to their initial settings.
Performs equalization on both speaker and AUX outputs. Clicking this button
opens the Equalizer Screen. (See
Output gains are displayed numerically. Numerical values can be changed
using the arrows to the right of each value.
Initial setting as follows:
Speaker, USB, CODEC, AUX: 0 dB
Bluetooth: –20 dB
Tip: Linked to faders (I).
Used to adjust output gains.
Tip: Linked to output gain display (G).
Click to mute corresponding output. Clicking again returns output to the
previous level.
Click to return all output adjustment settings to their initial settings.
Description
Description
p.
7.)
6
Advertisement
Table of Contents
