Table of Contents
Advertisement
(3) Steering Mode
Set whether or not to track a sound source by clicking "Auto" or "Fixed."
The set mode is displayed in orange.
"Auto": Select this when tracking the sound source.
"Fixed": Select this when the sound source position is fixed and thus not being tracked.
Initial setting: Auto
(4) Echo Canceller (AEC)
Name
G ON/OFF switching
H NLP Level setting
I Microphone Gain setting Sets the output volume level of the beam steering microphone.
(5) Noise Cancellation
Name
J ON/OFF switching
K Attenuation setting
(6) APPLY button
Click this button after all settings on this screen are completed. Setting contents are applied.
Turns the [AEC] (Acoustic Echo Canceller) mode ON or OFF.
The selected mode is displayed in orange.
Initial setting: ON
Sets the setting level for Non-Linear AEC processing.
Setting range: Low, Mid, High
Initial setting: Mid
Setting range: –6, –4, –2, 0, 2, 4 and 6 dB
Initial setting: 0 dB
Turns the noise cancellation mode ON or OFF.
The selected mode is displayed in orange.
Initial setting: ON
Sets the amount of noise attenuation in dB.
Setting range: 6, 9 and 12 dB
Initial setting: 9 dB
Description
Description
10
Advertisement
Table of Contents
