Panduit SmartZone PViQ Technical Reference

Using a power splitter to power pviq panels

Download this manual

Using a Power Splitter to Power PVIQ Panels

Applies to:

Objective:

Pre-Requisites:

Parts Required

Description

POE Power splitter

2.5mm jack to 2.1mm plug adapter

2.5mm jack to 2.5mm plug –plug cord

Hook and loop cable tie mount

Hook and loop strip

SmartZone PVIQ Panels

The purpose of this Technical Reference is to demonstrate how to use a

PoE splitter (PowerDsine 701 high power splitter) and a PanView

DPoE8S2XG DPoE panel as a power resource for the PanView iQ™

(PViQ™) Panel Manager.

Currently the PViQ Panel Manager only accepts power through a DC

jack connector using the brick power converter AC 120V – DC 12V, but a

PoE splitter and a DPOE Panel could also be used to power the Panel

Manager.

Part Number

PD-AS-701/12

DCA-1

839-1009-ND

ABMT-S6-C20

HLS1.5S-X0

Technical Reference 78-SZ

Published: 7/25/18

Manufacturer

PowerDsine

Allied Electronics

Digi-key

Panduit

Page 1: Required
Technical Reference 78-SZ Published: 7/25/18 Using a Power Splitter to Power PVIQ Panels Applies to: SmartZone PVIQ Panels The purpose of this Technical Reference is to demonstrate how to use a PoE splitter (PowerDsine 701 high power splitter) and a PanView Objective: DPoE8S2XG DPoE panel as a power resource for the PanView iQ™...
Page 2 Performing the Procedure General configuration overview www.panduit.com...
Page 3 Attach the hook tie mount to the PoE splitter as depicted in figure a and loop the strip through the buckle as show in figure b Figure a) Hook tie mount attached to power splitter Figure b) Hook and loop strip attached to power splitter www.panduit.com...
Page 4 Figure c) 2.5mm cable to 2.1mm conversion using the cable adaptor Mounting the Power Splitter Mount the POE power splitters using the hook tie loop behind the rack or in a convenient easy to access location near the Panel Manager as depicted in Figures c and d www.panduit.com...
Page 5 Figure d) PoE mounted behind the rack Figure e) PoE splitter mounted near Panel Manager www.panduit.com...
Page 6 Connectivity Start by making the connection from the network to the DPoE panel (or any other PoE power injector) and to the PoE power splitter ending at the Panel Manager as depicted in Figure e Figure e) Network Connectivity www.panduit.com...