Fiber Optic Ethernet Ports - Siemens RUGGEDCOM RS900F Installation Manual

RUGGEDCOM RS900F
Installation Guide
Section 4.2

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent
Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx)
and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.
Port Types
1
Figure 14: MTRJ Port
1. Tx Connector 2. Rx Connector
1
Figure 16: SC Port
1. Tx Connector 2. Rx Connector
LEDs
Each port features an LED that indicates the link/activity state of the port.
Yellow (Solid)
Yellow (Blinking)
Off
Specifications
For specifications on the available fiber optic Ethernet ports, refer to
Specifications".
Fiber Optic Ethernet Ports
2
2
State
1
Figure 15: LC Port
1. Tx Connector 2. Rx Connector
1
Figure 17: ST Port
1. Tx Connector 2. Rx Connector
Description
Link established
Link activity
No link detected
Section 5.4, "Fiber Optic Ethernet Port
Chapter 4
Communication Ports
2
2
23