Ethernet Ports; Ethernet Port Configuration - Siemens A80485-1 Quick Start Manual

CONFIGURATION
_________________________________________________________________________________________________________
4. From the Serial Port screen, press the ENTER key to bring up the serial port parameters
screen.
5. Set the serial port parameters as required using the keypad and navigation keys.
4
2.4

ETHERNET PORTS

The GCP Display has three Ethernet ports: Laptop port, Ethernet 1 (powered), and Ethernet 2
(unpowered). The setting options for these ports are:
Laptop Port
Server*
Client
Disabled
Ethernet 1 and 2 Ports
Disabled*
Client
* Denotes default setting

2.4.1 Ethernet Port Configuration

The Laptop Ethernet port has three modes: Server, Client, and Disabled. The Ethernet 1 and
Ethernet 2 ports have two modes: Disabled and Client. Ethernet ports 1 and 2 also have
additional parameters for Path Type and Protocol, which are used in conjunction with PTC and
ATCS Back Office communications. Consult the GCP manual for details and information on
these settings.
SIG-QG-17-05
Version No.: A
The Ethernet 1 powered connector is designed specifically for
Siemens Ethernet Spread Spectrum Radios and may not power other
Power-Over-Ethernet (POE) devices.
5
NOTE
2-4
DECEMBER 2017