Reading Data From Cv/Cvm1 - Omron CV/CVM1 Replacement Manual

From cv/cvm1 to cs1
Table of Contents

Advertisement

3.

Reading data from CV/CVM1

Use the CX-Programmer, and read the ladder programs, PLC settings and Data Memory from the CV/CVM1.
Required items
Support software
(PC)
Connecting cable
PC
CV/CVM1
(1) Mount the peripheral interface (CV500-CIF01) to the CV/CVM1 CPU unit, and connect it with the personal
computer.
(2) Start up the CX-Programmer. (From the Windows Start menu, select All Programs - OMRON - CX-One -
CX-Programmer - CX-Programmer.)
(3) Select CV500, CV1000, CV2000, CVM1 or CVM1-V2 for the Device Type. (Select File – New to show the
below dialog box.) (The following example selects CVM1-CPU21-V2.)
(4) Connect the PLC and the CX-Programmer online. (Select PLC - Work Online)
6
CX-Programmer
Connecting cable,
CV500-CIF01
D-SUB 25 pins - 9 pins
conversion,
CS1W-CIF31
Peripheral port
CX-One (CXONE-AL[][]C-V[], CXONE-AL[][]D-V[])
Or,
CX-Programmer (WS02-CXPC[]-V[])
CV500-CIF01
+
Conversion connector: D-SUB25 pin (female)-9 pins (female)
+
CS1W-CIF31

Advertisement

Table of Contents
loading

Table of Contents