Overview - Silvercrest V 125 B2 KAT Operating Instructions Manual

1. Overview

1 Button and LED for the Wet function (for moist food)
2 Button and LED for the Vacuum function (for containers and bags with the valve
above the connection 8)
3 Button and LED for the Seal film function (no vacuum)
4 Button and LED for the Vacuum + Seal film function
5 Button and LED for the Soft function (for pressure-sensitive food)
6 Power cable with mains plug
7 Opening for the power cable on the underside of the device
8 Connection for vacuum tubes 19
9 Button for opening the lid (left and right)
10 Sealing strip
11 Upper sealing ring
12 Lid
13 Rear reference ridge
14 Suction nozzle (for the Vacuum + Seal film function)
15 Side reference ridge
16 Lower sealing ring
17 Welding wire
18 Collector for liquids (removable)
Figure A:
19 Vacuum tubes (60 cm)
20 Adapter A (e.g. for Ernesto containers* and FoodSaver lunchboxes**)
21 Adapter B (e.g. for FoodSaver freshness containers**)
22 Adapter C (e.g. for CASO containers** and FoodSaver storage boxes**)
* not included in items supplied
** Containers from other manufacturers - not included in items supplied.
CASO is a registered brand of Caso Holding GmbH
FoodSaver is a registered brand of Sunbeam Products, Inc.
Figure B:
23 Cable spool at the underside of the device
3
GB