Remote Configuration; D3Rcam Craft Interface Main Menu - ADC Soneplex D3LXC-FCA100 User Manual

LTPS-UM-8013-03
R C
EMOTE
Use the D3RCAM craft interface system menu to view or edit the configuration for each D3LX RMT module in
the chassis. This menu can also be used to equip, provision, assign thresholds, and assign service state. The
D3RCAM Configuration menu is shown in
1 Connect a maintenance terminal to the craft port on the D3RCAM front panel. Logon to the craft interface
system as described in
The Main Menu appears, as shown in
communication parameters (or computer software interface) and retry this procedure.
D3LX CO and RMT Modules
ONFIGURATION
Figure 22 on page
"Connecting a Maintenance Terminal to the D3RCAM Craft Port" on page
Figure
Figure 20. D3RCAM Craft Interface Main Menu
August 30, 2002
34.
20. If the Main Menu does not appear, check the terminal

Remote Configuration

20.
33