Table of Contents
Advertisement
User Manual 190S6FGT
17 You will return to the desktop. The system is now touch enabled!
You can configure settings by selecting:
START => Programs => ONE2K (XP) =>:
CONFIG
●
For setting a different communication port.
MKSCREEN
●
For re-calibrating the screen.
TOUCH
●
For restarting the touch driver if you manually stopped the
Onetouch driver.
UNINSTAL
●
For removing the driver.
The upper figure shows the CONFIG screen.
■
In the 'COM Port Select:' box you can select a different Serial
communication port (COM / RS232), if available.
■
In the 'Touch Mode Select:' box you can select between two modes.
Mode 1 is default.
The lower figure shows the helpfile, explaining the differences between
Mode 1 and Mode 2.
26
Advertisement
Table of Contents
