Table of Contents
Advertisement
User Manual 190S6FGT
1
2
3
+ -
6
7
8
4 4
5 5
5.2
REAR VIEW
1. STATUS LED
Indicates the status of the monitor.
2. POWER switch
Turns power on/off from stand-by mode. There is a wait period
between on/off cycles.
3. OSD Menu button
Use this button to enter the OSD controls.
4. Arrow Up /Down buttons
Use these buttons to navigate through the On Screen Display menu.
5. Brightness hotkey
When the Up and Down arrow buttons are pressed, the adjustment
control for the BRIGHTNESS will be shown.
6. Arrow Left/Right buttons
Use these buttons to navigate through the On Screen Display menu.
7. Auto adjust
Use this button to adjust the
Horizontal position
●
Vertical position
●
Phase and clock settings
●
8. Volume L/R controls
Use a small screwdriver with slot tip to set the required volume
level. Turn the controls clockwise to increase the volume level, or
counter-clockwise to decrease the volume level.
16
Advertisement
Table of Contents
