Minimum Cell Voltage; Minimum Cell Voltage Sensor; Maximum Cell Voltage Sensor; Minimum Temperature Sensor - GRAUPNER HoTT General Engine-Module 2-6 S Manual

6.1. Minimum Cell Voltage (Page 2)
DEC
Min . C ell Vol ta g e
>Set Warning :
Voltage/Cell :
Warning Time :
Repeat Time :
Signal Tone :
Min. Voltage : 0.000V
6.2. Minimum Cell Voltage Sensor 1 (Page 3)
DEC
Min . Sen s or 1 Vo lt ag e
>Set Warning :
Min Voltage :
Warning Time :
Repeat Time :
Signal Tone :
Sensor 1 :
6.3. Maximum Cell Voltage Sensor 1 (Page 4)
DEC
Ma x. S ens or 1 Vo l ta ge
>Set Warning :
Min Voltage :
Warning Time :
Repeat Time :
Signal Tone :
Sensor 1 :
6.4. Minimum Temperature Sensor 1 (Page 5)
DEC
Min . Sen s or 1 Te m p
>Set Warning :
Temperature :
Warning Time :
Repeat Time :
Signal Tone :
Sensor 1 :
33610 General Engine-Module - Graupner HoTT 2.4
INC
The voltage of the battery connected to socket 6 is monitored. Warning
page 2
threshold set between 2.5 and 4.2 V (0.1 V steps).
3.3V
Factory setting: 3.3 V, Signal Tone: Q
Off
Always
The bottom line shows the current measured value.
Q
INC
The voltage of the battery connected to sensor 1 (socket 5) is monito-
page 3
red. Warning threshold set between 0 and 80.0 V (0.1 V steps).
5.0V
Factory setting: 5.0 V, Signal Tone: R
Off
Always
R
0.00V
INC
The voltage of the battery connected to sensor 1 (socket 5) is monito-
page 4
red. Warning threshold set between 0 and 80.0 V (0.1 V steps).
30.0V
Factory setting: 30 V, Signal Tone: J
Off
Always
J
0.00V
INC
The temperature of the sensor 1 (socket 5) is monitored. Warning
page 5
threshold set between -20 and 200° C (1° C steps).
0°C
Factory setting: 0° C, Signal Tone: F
Off
Always
F
00°C
08