GRAUPNER HoTT General Engine-Module 2-6 S Manual page 21

Graupner hott 2.4
Table of Contents

Advertisement

EG DECLARATION OF CONFORMITY:
We hereby declare that the following product:
General Engine-Module order.-no. 33610
confi rms with the essential protective requirements as laid down in the directive for harmonising the statua-
tory directives of the member states concerning electro-magnetic interference 2004/108/EC.
This product has been tested for electro-magnetic interference in accordance with the following norms:
EN 61000-6-1
EN 61000-6-3
This declaration was produced by
Graupner GmbH & Co. KG
Henriettenstr. 94-96
73230 Kirchheim/Teck
and is valid for the manufacturer / importer of the product
73230 Kirchheim/Teck, den
Environmental Protection Notes
When this product comes to the end of its useful life, you must not dispose of it in the or-
dinary domestic waste. The correct method of disposal is to take it to your local collection
point for recycling electrical and electronic equipment. The symbol shown here, which may
be found on the product itself, in the operating instructions or on the packaging, indicates
that this is the case.
Individual markings indicate which materials can be recycled and re-used. You can make an
important contribution to the protection of our common environment by re-using the product,
recycling the basic materials or recycling redundant equipment in other ways.
Remove batteries from your device and dispose of them at your local collection point for batteries.
In case of R/C models, you have to remove electronic parts like servos, receiver or speed controller from the
product in question, and these parts must be disposed of with a corresponding collection point for electrical
scrap.
If you don't know the location of your nearest disposal centre, please enquire at your local council offi ce.
33610 General Engine-Module - Graupner HoTT 2.4
12.01.2011
Stefan Graupner
Managing Director
20

Advertisement

Table of Contents
loading

Table of Contents