Maximum Voltage Socket; Minimum Rpm; Maximum Rpm - GRAUPNER HoTT General Engine-Module 2-6 S Manual

6.13. Maximum Voltage socket 1 (Page 14)
DEC
M ax . P o we r Vo l ta g e
page 14
>Set Warning :
Max. Voltage :
Warning Time :
Repeat Time :
Signal Tone :
Voltage :
6.14. Minimum RPM (Page 15)
DEC
Min i mum R P M
page 15
>Set Warning :

Minimum rpm :

Warning Time :
Repeat Time :
Signal Tone :
RPM ( 2 ) :
6.15. Maximum RPM (Page 16)
DEC
Ma xi m um R PM
>Set Warning : page 16

Maximum rpm :

Warning Time :
Repeat Time :
Signal Tone :
RPM ( 2 ) :
11
INC
The voltage of the battery connected to socket 1 is monitored. Warning
threshold set between 0 and 80.0 V (0.1 V steps).
30.0V
Factory setting: 30 V, Signal Tone: X
Off
Always
X
0.00V
Monitors the optional speed sensor order no. 33615 or 33616 connec-
INC
ted to socket 9.
With connected speed sensor, the current engine rpm is determined.
Therefore, you must fi rst specify how many blades the propeller / rotor
has to get the correct rpm (see Section 7.2). In addition, you can set the
500
minimum engine speed at which the alarm should be triggered.
Off
Blade Number: adjustable from 1 to 6 blades
Always
The warning threshold is adjustable from 0 to 200.000 rpm (1 blade)
T
with 10 rpm steps.
Factory setting: 200 rpm, Signal Tone: T
0
INC
Monitors the optional speed sensor order no. 33615 or 33616 connec-
ted to socket 9.
7000 The warning threshold is adjustable from 0 to 200.000 rpm (1 blade)
Off
with 10 rpm steps.
Always
Factory setting: 7000 rpm, Signal Tone: Y
Y
0
33610 General Engine-Module - Graupner HoTT 2.4